|
The New Jersey Institute of Technology's Electronic Theses & Dissertations Project
Das, Sanchoy K. has served on the committee of
79 theses/dissertations that are available online.
* indicates that the advisor was committee chair or co-chair.
Author |
Degree |
Year |
|
Title |
ETD# |
Chen, Chen |
PhD |
© 2022 |
|
Optimizing incentives for systems with heterogeneous agents |
njit-etd2022-033 |
Yilmaz, Dogacan |
PhD |
© 2022 |
|
Integrated machine learning and optimization approaches |
njit-etd2022-063 |
Bushaj, Sabah |
PhD |
© 2021 |
|
Multi-stage stochastic optimization and reinforcement learning for forestry epidemic and covid-19 control planning |
njit-etd2021-040 |
Shan, Pinyuan |
PhD |
© 2021 |
|
Constructive solution methodologies to the capacitated newsvendor problem and surrogate extension |
njit-etd2021-087 |
Yin, Xuecheng |
PhD |
© 2021 |
|
Stochastic programming and agent-based simulation approaches for epidemics control and logistics planning |
njit-etd2021-053 |
Wright, Joseph M. |
PhD |
© 2020 |
|
A comprehensive and absolute corporate sustainability assessment and enhanced input output life cycle assessment |
njit-etd2020-039 |
Zhu, Wen |
PhD |
© 2020 |
* |
Online fulfillment: f-warehouse order consolidation and bops store picking problems |
njit-etd2020-071 |
Zamka, Ahmad Basem |
MS |
© 2019 |
* |
Assignment of e-commerce orders to fulfillment warehouses |
njit-etd2019-055 |
Caffarelli, Luca |
MS |
© 2018 |
|
Halal certification for an industrial machine intended to come in contact with food |
njit-etd2018-002 |
Pathak, Chaitanya Narendra |
PhD |
© 2018 |
|
A methodological framework for quantifying impacts of truck traffic on regional network with implications to transport policy |
njit-etd2018-029 |
Tali, Gonxhe |
MS |
© 2018 |
|
Start-up and open innovation |
njit-etd2018-016 |
Hoseini, Babak |
PhD |
© 2017 |
|
Appointment planning and scheduling in primary care |
njit-etd2017-016 |
Onal, Sevilay |
PhD |
© 2017 |
* |
Design and optimization of an explosive storage policy in internet fulfillment warehouses |
njit-etd2017-044 |
Rajaei Dehkordi, Sharareh |
PhD |
© 2017 |
|
Evaluating the impact of adopting 3d printing services on the retailers |
njit-etd2017-117 |
Zhang, Jingran |
PhD |
© 2017 |
* |
Decision models for fast-fashion supply and stocking problems in internet fulfillment warehouses |
njit-etd2017-098 |
Ikhmeis, Sufian |
PhD |
© 2015 |
* |
Collaborative rescheduling of flights in a single mega-hub network |
njit-etd2015-052 |
Yagci, Ismail Artun |
PhD |
© 2014 |
* |
Extracting product development intelligence from web reviews |
njit-etd2014-022 |
Zhang, Xuanqi |
PhD |
© 2014 |
* |
Performance analysis and scheduling strategies for ambulatory surgical facilities |
njit-etd2014-060 |
Boodhoo, Shivon S. |
PhD |
© 2013 |
* |
HOSX: Hospital operations excellence model |
njit-etd2013-068 |
Leone, Geraldine Kelly |
PhD |
© 2010 |
* |
Operating characteristics of passenger screening processes and the development of a paced inspection system |
njit-etd2010-024 |
Olapiriyakul, Kamolbhan |
PhD |
© 2010 |
|
Virtual world commerce adoption (VWCA) : a case study of second life investigating the impacts of perceived affordances, trust, and need satisfaction |
njit-etd2010-035 |
Olapiriyakul, Sun |
PhD |
© 2010 |
|
End-of-life analysis of nanotechnology products |
njit-etd2010-025 |
Otegbeye, Mojisola Kike |
PhD |
© 2010 |
|
The floating contract between risk-averse supply chain partners in a volatile commodity price environment |
njit-etd2010-091 |
Reagan, Randy A. |
PhD |
© 2010 |
* |
Resource assignment in short life technology intensive (SLTI) new product development (NPD) |
njit-etd2010-029 |
Al-Smadi, Yahia Mohammad |
PhD |
© 2009 |
|
Kinematic synthesis of planar four bar and geared five bar mechanisms with structural constraints |
njit-etd2009-001 |
Besenski, Dejan |
PhD |
© 2009 |
|
Optimizing container retrieval operation at a port container terminal |
njit-etd2009-002 |
Kanchanapiboon, Atipol |
PhD |
© 2009 |
* |
Optimizing replenishment order quantities in uncoordinated supply chains |
njit-etd2009-054 |
Valoura, Melissa |
MS |
© 2009 |
|
Water purification in Haiti : An engineers without borders project |
njit-etd2009-086 |
Nearier, Robert |
PhD |
© 2008 |
* |
Modeling inventory and responsiveness costs in a supply chain |
njit-etd2008-066 |
Solano-Cayama, Roger Angel |
PhD |
© 2008 |
* |
Service supply chain management : a hierarchical decision modeling approach |
njit-etd2008-074 |
Sundaram, Karthikeyan |
MS |
© 2005 |
* |
A multi-factor model for evaluating manufacturing defect opportunities in six sigma analysis |
njit-etd2005-122 |
Dhimmar, Riteshkumar |
MS |
© 2004 |
* |
Case studies in disassembly process planning |
njit-etd2004-049 |
Lee, Wen-Tzong |
PhD |
© 2004 |
|
The design of adjustable spherical mechanisms using plane-to-sphere and sphere-to-plane projections |
njit-etd2004-089 |
Padgaonkar, Amol Shrikrishna |
MS |
© 2004 |
* |
Modeling and analysis of hospital facility layout problem |
njit-etd2004-010 |
Sengupta, Tirthankar |
PhD |
© 2004 |
|
Investigating graphical user interface usability on task sequence and display structure dependencies |
njit-etd2004-125 |
Tharanathan, Anand |
MS |
© 2004 |
|
Human factors approach towards improving readability of bus schedules |
njit-etd2004-075 |
Pak, Kyung Geun |
PhD |
© 2002 |
|
Destructive disassembly of bolts and screws using impact |
njit-etd2002-051 |
Shishkin, Dimitri V. |
PhD |
© 2002 |
|
Development of icejet-based surface processing technology |
njit-etd2002-087 |
Russell, Kevin |
PhD |
© 2001 |
|
Kinematic synthesis of adjustable spatial four and five-bar mechanisms for finite and multiply separated positions |
njit-etd2001-051 |
Sonnenberg, Manuela |
PhD |
© 2001 |
|
Force and effort analysis of unfastening actions in disassembly processes |
njit-etd2001-084 |
Wirojanagud, Pornsarun |
MS |
© 2001 |
|
Simulation modeling for integrated e-supply chain management |
njit-etd2001-028 |
Batra, Vikram |
MS |
© 2000 |
|
Development and integration of a decision support system for electronic outsourcing into telemanufacturing service provider |
njit-etd2000-044 |
Tereshkovich, William |
PhD |
© 2000 |
|
Optimum design and machining parameters of a permanent magnet brushless DC linear motor as a CNC feed drive |
njit-etd2000-009 |
Al-Okush, Hussam Fawzi |
MS |
© 1999 |
|
Assessing the impact of design for environment guidelines : a case study of office telephones |
njit-etd1999-037 |
Limaye, Ketan Giridhar |
MS |
© 1999 |
|
System simulation and modeling of electronics demanufacturing facilities |
njit-etd1999-007 |
Yedlarajaiah, Pradeep Kumar |
MS |
© 1999 |
* |
Metrics for estimating the product disassembly effort |
njit-etd1999-004 |
Almonor, Jean Benoit |
MS |
© 1998 |
* |
Design of an effective and timely product development process for medical devices |
njit-etd1998-035 |
Patel, Prashant A. |
MS |
© 1998 |
* |
Tools for the design of flexible manufacturind systems |
njit-etd1998-085 |
Raj, Narendra P. |
MS |
© 1998 |
* |
Demanufacturing metrics for industrial fasteners and disassembly process |
njit-etd1998-092 |
Veerapaneni, Bhavani P. |
MS |
© 1998 |
* |
A study to analyze and improve mechanical and electro-mechanical designs using design for quality manufacturability (DFQM) technique |
njit-etd1998-110 |
Asadathorn, Nutthapol |
PhD |
© 1997 |
|
Scheduling in assembly type job-shops |
njit-etd1997-034 |
Badwe, Devendra Jayant |
MS |
© 1997 |
|
Multi-lifecycle assessment of cathode ray tubes |
njit-etd1997-073 |
Datla, Vikram V. |
MS |
© 1997 |
* |
Design improvement using reverse analysis in design for quality manufacturability |
njit-etd1997-050 |
Karwande, Navin |
MS |
© 1997 |
* |
Measuring the need for manufacturing flexibility and evaluating its economic benefits |
njit-etd1997-022 |
Munshi, Preetesh U. |
MS |
© 1997 |
|
Analysis of surface texture parameters and cutting forces in milling operations |
njit-etd1997-078 |
Resare, Lars Johan |
MS |
© 1997 |
|
A decision support system for the equipment selection of robotic manufacturing cells |
njit-etd1997-003 |
Gami, Samir R. |
MS |
© 1996 |
* |
Design for quality manufacturability analysis of total nonconformity damaged parts |
njit-etd1996-055 |
Xu, Haiping |
MS |
© 1996 |
|
Design and analysis of environmentally safe cooling systems for machine tools |
njit-etd1996-111 |
Dhar, Abhinav |
MS |
© 1995 |
* |
Analysis of a design for its quality manufacturability in terms of misalignments and fastener related problems |
njit-etd1995-019 |
Ghauri, Muhammad Mutahir |
MS |
© 1995 |
|
Development of an expert system to facilitate a pump manufacturing/warehouse facility |
njit-etd1995-084 |
Ramachandra, Suriyanarayanan |
MS |
© 1995 |
* |
Design for quality manufacturability analysis for common assembly process |
njit-etd1995-008 |
Stroman, Kartika-Sari |
MS |
© 1995 |
* |
Auditing & measuring the need for flexibility in a manufacturing facility |
njit-etd1995-112 |
Tamboo, Altaf Yusuf |
MS |
© 1995 |
* |
Design for quality manufacturability analysis of missing/misplaced parts and part interference |
njit-etd1995-113 |
Withka, Michael J. |
MS |
© 1995 |
* |
Case study of assembly defects in manufactured products |
njit-etd1995-122 |
Bao, Jujiang |
MS |
© 1994 |
|
Building oriented surface generation through IGES specification |
njit-etd1994-062 |
Mathelier, Martin A. |
MS |
© 1994 |
* |
Concurrent engineering and design for manufacture in the medical device industry |
njit-etd1994-108 |
Nathan, Sita D. |
MS |
© 1994 |
* |
An integrated MRP and finite scheduling system to derive detailed daily schedules for a manufacturing shop |
njit-etd1994-019 |
Ramirez, Fe Irma A. |
MS |
© 1994 |
* |
A survey of manufacturing practices in Southeast Asia |
njit-etd1994-121 |
Bai, Yitao |
MS |
© 1993 |
|
Simulation study for the effect of dependencies in queueing systems |
njit-etd1993-017 |
Barzani, Behrouz |
MS |
© 1993 |
* |
Design and development of flexible manufacturing cells - a case study |
njit-etd1993-014 |
Chilukuri, Raghu |
MS |
© 1993 |
* |
Measures for estimating the need for flexibility in a manufacturing facility |
njit-etd1993-069 |
Citarella, Jennifer Anne |
MS |
© 1993 |
|
A review of acetabular prostheses for total hip arthroplasty |
njit-etd1993-073 |
Kim, Tae-Sung |
MS |
© 1993 |
* |
Development of an intelligent geometry measurement procedure for coordinate measuring machines |
njit-etd1993-101 |
Papaikonomou, Asterios |
MS |
© 1993 |
|
An application of neural networks to statistical process control |
njit-etd1993-128 |
Wang, Shao Jie |
PhD |
© 1993 |
|
Kinematic synthesis of adjustable four-bar mechanisms for multi-phase motion generation |
njit-etd1993-047 |
Goceljak, John |
MS |
© 1992 |
* |
Cost deployment based on quality function deployment |
njit-etd1992-074 |
Manjunath, A. C. |
MS |
© 1992 |
* |
Clustering algorithm for local area network design in a CIM environment |
njit-etd1992-094 |
Meherally, Irshad |
MS |
© 1992 |
|
Design of a material handling system for the automatic assembly of a shower head |
njit-etd1992-097 |
Prasad, Shrad |
MS |
© 1992 |
* |
Design for quality manufacture : formulation of the macro architecture for a DFQM methodology |
njit-etd1992-105 |
If you have any questions please contact the ETD Team, libetd@njit.edu.
Created 4/12/01; updated 8/30/02, 06/30/05
|
NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003
|
|