Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/theses/2250/ in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: The durability of hot mix asphalt with petroleum contaminated soils
Author: DuBose, Bonnie H.
View Online: njit-etd1992-070
(xii, 43 pages ~ 1.4 MB pdf)
Department: Department of Civil and Environmental Engineering
Degree: Master of Science
Program: Environmental Engineering
Document Type: Thesis
Advisory Committee: Meegoda, Jay N. (Committee chair)
Deutschman, Harold D. (Committee member)
Date: 1992-10
Keywords: Asphalt concrete -- Testing
Asphalt concrete -- Deterioration
Petroleum waste -- Recycling
Availability: Unrestricted
Abstract:

Petroleum contaminated soils are considered solid waste They must be taken to solid waste facilities such as landfills or some other method must be found to deal with them. Landfills are becoming limited and is looked upon by the government as the least attractive option. One method that looks promising is to use petroleum contaminated soils in Hot Mix Asphalt Concrete.

In the research program the following are examined: 1) Investigation of material properties of the petroleum contaminated soil and aggregates 2) The proper procedure to produce a design blend of asphalt concrete. 3) Establishing the test procedure protocol to determine if asphalt concrete is durable 4) Field test design for the testing of asphalt concrete durability.

This thesis also discusses the durability aspect of using petroleum contaminated soil in Hot Mix Asphalt. Test were performed to determine if petroleum contaminated soil can withstand varying temperatures and comparable loads to heavy traffic. In order to determine the durability of petroleum contaminated soil in Hot Mix Asphalt , the freeze-thaw, wet-dry, and Marshall Strength test were used to determine the tensile strength ratio, percentage swell, and the stability of asphalt concrete. The test showed asphalt concrete can be determined durable if it retains 80% of its strength during the first freeze-thaw or wet-dry cycle. From this experimental program, it is concluded that asphalt concrete with petroleum contaminated soils is durable under cyclic temperatures


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003