|
| |
DC Servomotor Contour Geometry
DC ServomotorStraight/Taper Geometry
PMBDCLM GEOMETRY TOLERANCE
 | PMBDCLM Tolerance, Contour Geometry, High Depth of Cut (Surface 1-12) |
| PMBDCLM Tolerance, Contour Geometry, Central Depth of Cut (Surface 13-24) |
| PMBDCLM Tolerance, Contour Geometry, Low Depth of Cut (Surface 25-36) |
| PMBDCLM Tolerance, Straight/Taper Geometry, High Depth of Cut (Surface 1-12) |
| PMBDCLM Tolerance, Straight/Taper Geometry, Central Depth of Cut (Surface 13-24) |
| PMBDCLM
Tolerance, Straight/Taper Geometry, Low Depth of Cut (Surface 25-36) |
DC SERVOMOTOR CONTOUR
GEOMETRY TOLERANCE
| Surface 1, High Depth of Cut |
| Surface 2, High Depth of Cut |
| Surface 3, High Depth of Cut |
| Surface 4, High Depth of Cut |
| Surface 5, High Depth of Cut |
| Surface 6, High Depth of Cut |
| Surface 7, High Depth of Cut |
| Surface 8, High Depth of Cut |
| Surface 9, High Depth of Cut |
| Surface 10, High Depth of Cut |
| Surface 11, High Depth of Cut |
| Surface 12, High Depth of Cut |
| Surface 13, Central Depth of Cut |
| Surface 14, Central Depth of Cut |
| Surface 15, Central Depth of Cut |
| Surface 16, Central Depth of Cut |
| Surface 17, Central Depth of Cut |
| Surface 18, Central Depth of Cut |
| Surface 19, Central Depth of Cut |
| Surface 20, Central Depth of Cut |
| Surface 21, Central Depth of Cut |
| Surface 22, Central Depth of Cut |
| Surface 23, Central Depth of Cut |
| Surface 24, Central Depth of Cut |
| Surface 25, Low Depth of Cut |
| Surface 26, Low Depth of Cut |
| Surface 27, Low Depth of Cut |
| Surface 28, Low Depth of Cut |
| Surface 29, Low Depth of Cut |
| Surface 30, Low Depth of Cut |
| Surface 31, Low Depth of Cut |
| Surface 32, Low Depth of Cut |
| Surface 33, Low Depth of Cut |
| Surface 34, Low Depth of Cut |
| Surface 35, Low Depth of Cut |
| Surface
36, Low Depth of Cut
Back To Top of Page |
DC SERVOMOTOR STRAIGHT/TAPER
GEOMETRY TOLERANCE
| Surface 1, High Depth of Cut |
| Surface 2, High Depth of Cut |
| Surface 3, High Depth of Cut |
| Surface 4, High Depth of Cut |
| Surface 5, High Depth of Cut |
| Surface 6, High Depth of Cut |
| Surface 7, High Depth of Cut |
| Surface 8, High Depth of Cut |
| Surface 9, High Depth of Cut |
| Surface 10, High Depth of Cut |
| Surface 11, High Depth of Cut |
| Surface 12, High Depth of Cut |
| Surface 13, Central Depth of Cut |
| Surface 14, Central Depth of Cut |
| Surface 15, Central Depth of Cut |
| Surface 16, Central Depth of Cut |
| Surface 17, Central Depth of Cut |
| Surface 18, Central Depth of Cut |
| Surface 19, Central Depth of Cut |
| Surface 20, Central Depth of Cut |
| Surface 21, Central Depth of Cut |
| Surface 22, Central Depth of Cut |
| Surface 23, Central Depth of Cut |
| Surface 24, Central Depth of Cut |
| Surface 25, Low Depth of Cut |
| Surface 26, Low Depth of Cut |
| Surface 27, Low Depth of Cut |
| Surface 28, Low Depth of Cut |
| Surface 29, Low Depth of Cut |
| Surface 30, Low Depth of Cut |
| Surface 31, Low Depth of Cut |
| Surface 32, Low Depth of Cut |
| Surface 33, Low Depth of Cut |
| Surface 34, Low Depth of Cut |
| Surface 35, Low Depth of Cut |
| Surface
36, Low Depth of Cut
Back To Top of Page |
|
