Surface Finish
Home Finite Element Analysis Force Tolerance Surface Finish Regression

OPTIMUM DESIGN AND MACHINING PARAMETERS OF A PERMANENT MAGNET BRUSHLESS DC LINEAR MOTOR AS A CNC FEED DRIVE

By

William Tereshkovich

PMBDCLM Contour Surface    PMBDCLM Straight/Taper Surface    DC Servomotor Surface      Surface Profile

PMBDCLM CONTOUR SURFACE FINISH PARAMETERS

Surface 1: Part 1: Replicate 1, High Depth of Cut
Surface 1: Part 2: Replicate 1, High Depth of Cut
Surface 1: Part 1: Replicate 2, High Depth of Cut
Surface 1: Part 2: Replicate 2, High Depth of Cut
Surface 1: Part 1: Replicate 3, High Depth of Cut
Surface 1: Part 2: Replicate 3, High Depth of Cut
Surface 2: Part 1: Replicate 1, High Depth of Cut
Surface 2: Part 2: Replicate 1, High Depth of Cut
Surface 2: Part 1: Replicate 2, High Depth of Cut
Surface 2: Part 2: Replicate 2, High Depth of Cut
Surface 2: Part 1: Replicate 3, High Depth of Cut
Surface 2: Part 2: Replicate 3, High Depth of Cut
Surface 3: Part 1: Replicate 1, High Depth of Cut
Surface 3: Part 2: Replicate 1, High Depth of Cut
Surface 3: Part 1: Replicate 2, High Depth of Cut
Surface 3: Part 2: Replicate 2, High Depth of Cut
Surface 3: Part 1: Replicate 3, High Depth of Cut
Surface 3: Part 2: Replicate 3, High Depth of Cut
Surface 4: Part 1: Replicate 1, High Depth of Cut
Surface 4: Part 2: Replicate 1, High Depth of Cut
Surface 4: Part 1: Replicate 2, High Depth of Cut
Surface 4: Part 2: Replicate 2, High Depth of Cut
Surface 4: Part 1: Replicate 3, High Depth of Cut
Surface 4: Part 2: Replicate 3, High Depth of Cut
Surface 5: Part 1: Replicate 1, High Depth of Cut
Surface 5: Part 2: Replicate 1, High Depth of Cut
Surface 5: Part 1: Replicate 2, High Depth of Cut
Surface 5: Part 2: Replicate 2, High Depth of Cut
Surface 5: Part 1: Replicate 3, High Depth of Cut
Surface 5: Part 2: Replicate 3, High Depth of Cut
Surface 6: Part 1: Replicate 1, High Depth of Cut
Surface 6: Part 2: Replicate 1, High Depth of Cut
Surface 6: Part 1: Replicate 2, High Depth of Cut
Surface 6: Part 2: Replicate 2, High Depth of Cut
Surface 6: Part 1: Replicate 3, High Depth of Cut
Surface 6: Part 2: Replicate 3, High Depth of Cut
Surface 7: Part 1: Replicate 1, High Depth of Cut
Surface 7: Part 2: Replicate 1, High Depth of Cut
Surface 7: Part 1: Replicate 2, High Depth of Cut
Surface 7: Part 2: Replicate 2, High Depth of Cut
Surface 7: Part 1: Replicate 3, High Depth of Cut
Surface 7: Part 2: Replicate 3, High Depth of Cut
Surface 8: Part 1: Replicate 1, High Depth of Cut
Surface 8: Part 2: Replicate 1, High Depth of Cut
Surface 8: Part 1: Replicate 2, High Depth of Cut
Surface 8: Part 2: Replicate 2, High Depth of Cut
Surface 8: Part 1: Replicate 3, High Depth of Cut
Surface 8: Part 2: Replicate 3, High Depth of Cut
Surface 9: Part 1: Replicate 1, High Depth of Cut
Surface 9: Part 2: Replicate 1, High Depth of Cut
Surface 9: Part 1: Replicate 2, High Depth of Cut
Surface 9: Part 2: Replicate 2, High Depth of Cut
Surface 9: Part 1: Replicate 3, High Depth of Cut
Surface 9: Part 2: Replicate 3, High Depth of Cut
Surface 10: Part 1: Replicate 1, High Depth of Cut
Surface 10: Part 2: Replicate 1, High Depth of Cut
Surface 10: Part 1: Replicate 2, High Depth of Cut
Surface 10: Part 2: Replicate 2, High Depth of Cut
Surface 10: Part 1: Replicate 3, High Depth of Cut
Surface 10: Part 2: Replicate 3, High Depth of Cut
Surface 11: Part 1: Replicate 1, High Depth of Cut
Surface 11: Part 2: Replicate 1, High Depth of Cut
Surface 11: Part 1: Replicate 2, High Depth of Cut
Surface 11: Part 2: Replicate 2, High Depth of Cut
Surface 11: Part 1: Replicate 3, High Depth of Cut
Surface 11: Part 2: Replicate 3, High Depth of Cut
Surface 12: Part 1: Replicate 1, High Depth of Cut
Surface 12: Part 2: Replicate 1, High Depth of Cut
Surface 12: Part 1: Replicate 2, High Depth of Cut
Surface 12: Part 2: Replicate 2, High Depth of Cut
Surface 12: Part 1: Replicate 3, High Depth of Cut
Surface 12: Part 2: Replicate 3, High Depth of Cut
Surface 13: Part 1: Replicate 1, Central Depth of Cut
Surface 13: Part 2: Replicate 1, Central Depth of Cut
Surface 13: Part 1: Replicate 2, Central Depth of Cut
Surface 13: Part 2: Replicate 2, Central Depth of Cut
Surface 13: Part 1: Replicate 3, Central Depth of Cut
Surface 13: Part 2: Replicate 3, Central Depth of Cut
Surface 14: Part 1: Replicate 1, Central Depth of Cut
Surface 14: Part 2: Replicate 1, Central Depth of Cut
Surface 14: Part 1: Replicate 2, Central Depth of Cut
Surface 14: Part 2: Replicate 2, Central Depth of Cut
Surface 14: Part 1: Replicate 3, Central Depth of Cut
Surface 14: Part 2: Replicate 3, Central Depth of Cut
Surface 15: Part 1: Replicate 1, Central Depth of Cut
Surface 15: Part 2: Replicate 1, Central Depth of Cut
Surface 15: Part 1: Replicate 2, Central Depth of Cut
Surface 15: Part 2: Replicate 2, Central Depth of Cut
Surface 15: Part 1: Replicate 3, Central Depth of Cut
Surface 15: Part 2: Replicate 3, Central Depth of Cut
Surface 16: Part 1: Replicate 1, Central Depth of Cut
Surface 16: Part 2: Replicate 1, Central Depth of Cut
Surface 16: Part 1: Replicate 2, Central Depth of Cut
Surface 16: Part 2: Replicate 2, Central Depth of Cut
Surface 16: Part 1: Replicate 3, Central Depth of Cut
Surface 17: Part 2: Replicate 3, Central Depth of Cut
Surface 17: Part 1: Replicate 1, Central Depth of Cut
Surface 17: Part 2: Replicate 1, Central Depth of Cut
Surface 17: Part 1: Replicate 2, Central Depth of Cut
Surface 17: Part 2: Replicate 2, Central Depth of Cut
Surface 17: Part 1: Replicate 3, Central Depth of Cut
Surface 17: Part 2: Replicate 3, Central Depth of Cut
Surface 18: Part 1: Replicate 1, Central Depth of Cut
Surface 18: Part 2: Replicate 1, Central Depth of Cut
Surface 18: Part 1: Replicate 2, Central Depth of Cut
Surface 18: Part 2: Replicate 2, Central Depth of Cut
Surface 18: Part 1: Replicate 3, Central Depth of Cut
Surface 18: Part 2: Replicate 3, Central Depth of Cut
Surface 19: Part 1: Replicate 1, Central Depth of Cut
Surface 19: Part 2: Replicate 1, Central Depth of Cut
Surface 19: Part 1: Replicate 2, Central Depth of Cut
Surface 19: Part 2: Replicate 2, Central Depth of Cut
Surface 19: Part 1: Replicate 3, Central Depth of Cut
Surface 19: Part 2: Replicate 3, Central Depth of Cut
Surface 20: Part 1: Replicate 1, Central Depth of Cut
Surface 20: Part 2: Replicate 1, Central Depth of Cut
Surface 20: Part 1: Replicate 2, Central Depth of Cut
Surface 20: Part 2: Replicate 2, Central Depth of Cut
Surface 20: Part 1: Replicate 3, Central Depth of Cut
Surface 20: Part 2: Replicate 3, Central Depth of Cut
Surface 21: Part 1: Replicate 1, Central Depth of Cut
Surface 21: Part 2: Replicate 1, Central Depth of Cut
Surface 21: Part 1: Replicate 2, Central Depth of Cut
Surface 21: Part 2: Replicate 2, Central Depth of Cut
Surface 21: Part 1: Replicate 3, Central Depth of Cut
Surface 21: Part 2: Replicate 3, Central Depth of Cut
Surface 22: Part 1: Replicate 1, Central Depth of Cut
Surface 22: Part 2: Replicate 1, Central Depth of Cut
Surface 22: Part 1: Replicate 2, Central Depth of Cut
Surface 22: Part 2: Replicate 2, Central Depth of Cut
Surface 22: Part 1: Replicate 3, Central Depth of Cut
Surface 22: Part 2: Replicate 3, Central Depth of Cut
Surface 23: Part 1: Replicate 1, Central Depth of Cut
Surface 23: Part 2: Replicate 1, Central Depth of Cut
Surface 23: Part 1: Replicate 2, Central Depth of Cut
Surface 23: Part 2: Replicate 2, Central Depth of Cut
Surface 23: Part 1: Replicate 3, Central Depth of Cut
Surface 23: Part 2: Replicate 3, Central Depth of Cut
Surface 24: Part 1: Replicate 1, Central Depth of Cut
Surface 24: Part 2: Replicate 1, Central Depth of Cut
Surface 24: Part 1: Replicate 2, Central Depth of Cut
Surface 24: Part 2: Replicate 2, Central Depth of Cut
Surface 24: Part 1: Replicate 3, Central Depth of Cut
Surface 24: Part 2: Replicate 3, Central Depth of Cut
Surface 25: Part 1: Replicate 1, Low Depth of Cut
Surface 25: Part 2: Replicate 1, Low Depth of Cut
Surface 25: Part 1: Replicate 2, Low Depth of Cut
Surface 25: Part 2: Replicate 2, Low Depth of Cut
Surface 25: Part 1: Replicate 3, Low Depth of Cut
Surface 25: Part 2: Replicate 3, Low Depth of Cut
Surface 26: Part 1: Replicate 1, Low Depth of Cut
Surface 26: Part 2: Replicate 1, Low Depth of Cut
Surface 26: Part 1: Replicate 2, Low Depth of Cut
Surface 26: Part 2: Replicate 2, Low Depth of Cut
Surface 26: Part 1: Replicate 3, Low Depth of Cut
Surface 26: Part 2: Replicate 3, Low Depth of Cut
Surface 27: Part 1: Replicate 1, Low Depth of Cut
Surface 27: Part 2: Replicate 1, Low Depth of Cut
Surface 27: Part 1: Replicate 2, Low Depth of Cut
Surface 27: Part 2: Replicate 2, Low Depth of Cut
Surface 27: Part 1: Replicate 3, Low Depth of Cut
Surface 27: Part 2: Replicate 3, Low Depth of Cut
Surface 28: Part 1: Replicate 1, Low Depth of Cut
Surface 28: Part 2: Replicate 1, Low Depth of Cut
Surface 28: Part 1: Replicate 2, Low Depth of Cut
Surface 28: Part 2: Replicate 2, Low Depth of Cut
Surface 28: Part 1: Replicate 3, Low Depth of Cut
Surface 28: Part 2: Replicate 3, Low Depth of Cut
Surface 29: Part 1: Replicate 1, Low Depth of Cut
Surface 29: Part 2: Replicate 1, Low Depth of Cut
Surface 29: Part 1: Replicate 2, Low Depth of Cut
Surface 29: Part 2: Replicate 2, Low Depth of Cut
Surface 29: Part 1: Replicate 3, Low Depth of Cut
Surface 29: Part 2: Replicate 3, Low Depth of Cut
Surface 30: Part 1: Replicate 1, Low Depth of Cut
Surface 30: Part 2: Replicate 1, Low Depth of Cut
Surface 30: Part 1: Replicate 2, Low Depth of Cut
Surface 30: Part 2: Replicate 2, Low Depth of Cut
Surface 30: Part 1: Replicate 3, Low Depth of Cut
Surface 30: Part 2: Replicate 3, Low Depth of Cut
Surface 31: Part 1: Replicate 1, Low Depth of Cut
Surface 31: Part 2: Replicate 1, Low Depth of Cut
Surface 31: Part 1: Replicate 2, Low Depth of Cut
Surface 31: Part 2: Replicate 2, Low Depth of Cut
Surface 31: Part 1: Replicate 3, Low Depth of Cut
Surface 31: Part 2: Replicate 3, Low Depth of Cut
Surface 32: Part 1: Replicate 1, Low Depth of Cut
Surface 32: Part 2: Replicate 1, Low Depth of Cut
Surface 32: Part 1: Replicate 2, Low Depth of Cut
Surface 32: Part 2: Replicate 2, Low Depth of Cut
Surface 32: Part 1: Replicate 3, Low Depth of Cut
Surface 32: Part 2: Replicate 3, Low Depth of Cut
Surface 33: Part 1: Replicate 1, Low Depth of Cut
Surface 33: Part 2: Replicate 1, Low Depth of Cut
Surface 33: Part 1: Replicate 2, Low Depth of Cut
Surface 33: Part 2: Replicate 2, Low Depth of Cut
Surface 33: Part 1: Replicate 3, Low Depth of Cut
Surface 33: Part 2: Replicate 3, Low Depth of Cut
Surface 34: Part 1: Replicate 1, Low Depth of Cut
Surface 34: Part 2: Replicate 1, Low Depth of Cut
Surface 34: Part 1: Replicate 2, Low Depth of Cut
Surface 34: Part 2: Replicate 2, Low Depth of Cut
Surface 34: Part 1: Replicate 3, Low Depth of Cut
Surface 34: Part 2: Replicate 3, Low Depth of Cut
Surface 35: Part 1: Replicate 1, Low Depth of Cut
Surface 35: Part 2: Replicate 1, Low Depth of Cut
Surface 35: Part 1: Replicate 2, Low Depth of Cut
Surface 35: Part 2: Replicate 2, Low Depth of Cut
Surface 35: Part 1: Replicate 3, Low Depth of Cut
Surface 35: Part 2: Replicate 3, Low Depth of Cut
Surface 36: Part 1: Replicate 1, Low Depth of Cut
Surface 36: Part 2: Replicate 1, Low Depth of Cut
Surface 36: Part 1: Replicate 2, Low Depth of Cut
Surface 36: Part 2: Replicate 2, Low Depth of Cut
Surface 36: Part 1: Replicate 3, Low Depth of Cut
Surface 36: Part 2: Replicate 3, Low Depth of Cut         Back To Top Of Page

  PMBDCLM STRAIGHT/TAPER SURFACE FINISH PARAMETERS

Surface 1: Part 1: Replicate 1, High Depth of Cut
Surface 1: Part 2: Replicate 1, High Depth of Cut
Surface 1: Part 1: Replicate 2, High Depth of Cut
Surface 1: Part 2: Replicate 2, High Depth of Cut
Surface 1: Part 1: Replicate 3, High Depth of Cut
Surface 1: Part 2: Replicate 3, High Depth of Cut
Surface 2: Part 1: Replicate 1, High Depth of Cut
Surface 2: Part 2: Replicate 1, High Depth of Cut
Surface 2: Part 1: Replicate 2, High Depth of Cut
Surface 2: Part 2: Replicate 2, High Depth of Cut
Surface 2: Part 1: Replicate 3, High Depth of Cut
Surface 2: Part 2: Replicate 3, High Depth of Cut
Surface 3: Part 1: Replicate 1, High Depth of Cut
Surface 3: Part 2: Replicate 1, High Depth of Cut
Surface 3: Part 1: Replicate 2, High Depth of Cut
Surface 3: Part 2: Replicate 2, High Depth of Cut
Surface 3: Part 1: Replicate 3, High Depth of Cut
Surface 3: Part 2: Replicate 3, High Depth of Cut
Surface 4: Part 1: Replicate 1, High Depth of Cut
Surface 4: Part 2: Replicate 1, High Depth of Cut
Surface 4: Part 1: Replicate 2, High Depth of Cut
Surface 4: Part 2: Replicate 2, High Depth of Cut
Surface 4: Part 1: Replicate 3, High Depth of Cut
Surface 4: Part 2: Replicate 3, High Depth of Cut
Surface 5: Part 1: Replicate 1, High Depth of Cut
Surface 5: Part 2: Replicate 1, High Depth of Cut
Surface 5: Part 1: Replicate 2, High Depth of Cut
Surface 5: Part 2: Replicate 2, High Depth of Cut
Surface 5: Part 1: Replicate 3, High Depth of Cut
Surface 5: Part 2: Replicate 3, High Depth of Cut
Surface 6: Part 1: Replicate 1, High Depth of Cut
Surface 6: Part 2: Replicate 1, High Depth of Cut
Surface 6: Part 1: Replicate 2, High Depth of Cut
Surface 6: Part 2: Replicate 2, High Depth of Cut
Surface 6: Part 1: Replicate 3, High Depth of Cut
Surface 6: Part 2: Replicate 3, High Depth of Cut
Surface 7: Part 1: Replicate 1, High Depth of Cut
Surface 7: Part 2: Replicate 1, High Depth of Cut
Surface 7: Part 1: Replicate 2, High Depth of Cut
Surface 7: Part 2: Replicate 2, High Depth of Cut
Surface 7: Part 1: Replicate 3, High Depth of Cut
Surface 7: Part 2: Replicate 3, High Depth of Cut
Surface 8: Part 1: Replicate 1, High Depth of Cut
Surface 8: Part 2: Replicate 1, High Depth of Cut
Surface 8: Part 1: Replicate 2, High Depth of Cut
Surface 8: Part 2: Replicate 2, High Depth of Cut
Surface 8: Part 1: Replicate 3, High Depth of Cut
Surface 8: Part 2: Replicate 3, High Depth of Cut
Surface 9: Part 1: Replicate 1, High Depth of Cut
Surface 9: Part 2: Replicate 1, High Depth of Cut
Surface 9: Part 1: Replicate 2, High Depth of Cut
Surface 9: Part 2: Replicate 2, High Depth of Cut
Surface 9: Part 1: Replicate 3, High Depth of Cut
Surface 9: Part 2: Replicate 3, High Depth of Cut
Surface 10: Part 1: Replicate 1, High Depth of Cut
Surface 10: Part 2: Replicate 1, High Depth of Cut
Surface 10: Part 1: Replicate 2, High Depth of Cut
Surface 10: Part 2: Replicate 2, High Depth of Cut
Surface 10: Part 1: Replicate 3, High Depth of Cut
Surface 10: Part 2: Replicate 3, High Depth of Cut
Surface 11: Part 1: Replicate 1, High Depth of Cut
Surface 11: Part 2: Replicate 1, High Depth of Cut
Surface 11: Part 1: Replicate 2, High Depth of Cut
Surface 11: Part 2: Replicate 2, High Depth of Cut
Surface 11: Part 1: Replicate 3, High Depth of Cut
Surface 11: Part 2: Replicate 3, High Depth of Cut
Surface 12: Part 1: Replicate 1, High Depth of Cut
Surface 12: Part 2: Replicate 1, High Depth of Cut
Surface 12: Part 1: Replicate 2, High Depth of Cut
Surface 12: Part 2: Replicate 2, High Depth of Cut
Surface 12: Part 1: Replicate 3, High Depth of Cut
Surface 12: Part 2: Replicate 3, High Depth of Cut
Surface 13: Part 1: Replicate 1, Central Depth of Cut
Surface 13: Part 2: Replicate 1, Central Depth of Cut
Surface 13: Part 1: Replicate 2, Central Depth of Cut
Surface 13: Part 2: Replicate 2, Central Depth of Cut
Surface 13: Part 1: Replicate 3, Central Depth of Cut
Surface 13: Part 2: Replicate 3, Central Depth of Cut
Surface 14: Part 1: Replicate 1, Central Depth of Cut
Surface 14: Part 2: Replicate 1, Central Depth of Cut
Surface 14: Part 1: Replicate 2, Central Depth of Cut
Surface 14: Part 2: Replicate 2, Central Depth of Cut
Surface 14: Part 1: Replicate 3, Central Depth of Cut
Surface 14: Part 2: Replicate 3, Central Depth of Cut
Surface 15: Part 1: Replicate 1, Central Depth of Cut
Surface 15: Part 2: Replicate 1, Central Depth of Cut
Surface 15: Part 1: Replicate 2, Central Depth of Cut
Surface 15: Part 2: Replicate 2, Central Depth of Cut
Surface 15: Part 1: Replicate 3, Central Depth of Cut
Surface 15: Part 2: Replicate 3, Central Depth of Cut
Surface 16: Part 1: Replicate 1, Central Depth of Cut
Surface 16: Part 2: Replicate 1, Central Depth of Cut
Surface 16: Part 1: Replicate 2, Central Depth of Cut
Surface 16: Part 2: Replicate 2, Central Depth of Cut
Surface 16: Part 1: Replicate 3, Central Depth of Cut
Surface 17: Part 2: Replicate 3, Central Depth of Cut
Surface 17: Part 1: Replicate 1, Central Depth of Cut
Surface 17: Part 2: Replicate 1, Central Depth of Cut
Surface 17: Part 1: Replicate 2, Central Depth of Cut
Surface 17: Part 2: Replicate 2, Central Depth of Cut
Surface 17: Part 1: Replicate 3, Central Depth of Cut
Surface 17: Part 2: Replicate 3, Central Depth of Cut
Surface 18: Part 1: Replicate 1, Central Depth of Cut
Surface 18: Part 2: Replicate 1, Central Depth of Cut
Surface 18: Part 1: Replicate 2, Central Depth of Cut
Surface 18: Part 2: Replicate 2, Central Depth of Cut
Surface 18: Part 1: Replicate 3, Central Depth of Cut
Surface 18: Part 2: Replicate 3, Central Depth of Cut
Surface 19: Part 1: Replicate 1, Central Depth of Cut
Surface 19: Part 2: Replicate 1, Central Depth of Cut
Surface 19: Part 1: Replicate 2, Central Depth of Cut
Surface 19: Part 2: Replicate 2, Central Depth of Cut
Surface 19: Part 1: Replicate 3, Central Depth of Cut
Surface 19: Part 2: Replicate 3, Central Depth of Cut
Surface 20: Part 1: Replicate 1, Central Depth of Cut
Surface 20: Part 2: Replicate 1, Central Depth of Cut
Surface 20: Part 1: Replicate 2, Central Depth of Cut
Surface 20: Part 2: Replicate 2, Central Depth of Cut
Surface 20: Part 1: Replicate 3, Central Depth of Cut
Surface 20: Part 2: Replicate 3, Central Depth of Cut
Surface 21: Part 1: Replicate 1, Central Depth of Cut
Surface 21: Part 2: Replicate 1, Central Depth of Cut
Surface 21: Part 1: Replicate 2, Central Depth of Cut
Surface 21: Part 2: Replicate 2, Central Depth of Cut
Surface 21: Part 1: Replicate 3, Central Depth of Cut
Surface 21: Part 2: Replicate 3, Central Depth of Cut
Surface 22: Part 1: Replicate 1, Central Depth of Cut
Surface 22: Part 2: Replicate 1, Central Depth of Cut
Surface 22: Part 1: Replicate 2, Central Depth of Cut
Surface 22: Part 2: Replicate 2, Central Depth of Cut
Surface 22: Part 1: Replicate 3, Central Depth of Cut
Surface 22: Part 2: Replicate 3, Central Depth of Cut
Surface 23: Part 1: Replicate 1, Central Depth of Cut
Surface 23: Part 2: Replicate 1, Central Depth of Cut
Surface 23: Part 1: Replicate 2, Central Depth of Cut
Surface 23: Part 2: Replicate 2, Central Depth of Cut
Surface 23: Part 1: Replicate 3, Central Depth of Cut
Surface 23: Part 2: Replicate 3, Central Depth of Cut
Surface 24: Part 1: Replicate 1, Central Depth of Cut
Surface 24: Part 2: Replicate 1, Central Depth of Cut
Surface 24: Part 1: Replicate 2, Central Depth of Cut
Surface 24: Part 2: Replicate 2, Central Depth of Cut
Surface 24: Part 1: Replicate 3, Central Depth of Cut
Surface 24: Part 2: Replicate 3, Central Depth of Cut
Surface 25: Part 1: Replicate 1, Low Depth of Cut
Surface 25: Part 2: Replicate 1, Low Depth of Cut
Surface 25: Part 1: Replicate 2, Low Depth of Cut
Surface 25: Part 2: Replicate 2, Low Depth of Cut
Surface 25: Part 1: Replicate 3, Low Depth of Cut
Surface 25: Part 2: Replicate 3, Low Depth of Cut
Surface 26: Part 1: Replicate 1, Low Depth of Cut
Surface 26: Part 2: Replicate 1, Low Depth of Cut
Surface 26: Part 1: Replicate 2, Low Depth of Cut
Surface 26: Part 2: Replicate 2, Low Depth of Cut
Surface 26: Part 1: Replicate 3, Low Depth of Cut
Surface 26: Part 2: Replicate 3, Low Depth of Cut
Surface 27: Part 1: Replicate 1, Low Depth of Cut
Surface 27: Part 2: Replicate 1, Low Depth of Cut
Surface 27: Part 1: Replicate 2, Low Depth of Cut
Surface 27: Part 2: Replicate 2, Low Depth of Cut
Surface 27: Part 1: Replicate 3, Low Depth of Cut
Surface 27: Part 2: Replicate 3, Low Depth of Cut
Surface 28: Part 1: Replicate 1, Low Depth of Cut
Surface 28: Part 2: Replicate 1, Low Depth of Cut
Surface 28: Part 1: Replicate 2, Low Depth of Cut
Surface 28: Part 2: Replicate 2, Low Depth of Cut
Surface 28: Part 1: Replicate 3, Low Depth of Cut
Surface 28: Part 2: Replicate 3, Low Depth of Cut
Surface 29: Part 1: Replicate 1, Low Depth of Cut
Surface 29: Part 2: Replicate 1, Low Depth of Cut
Surface 29: Part 1: Replicate 2, Low Depth of Cut
Surface 29: Part 2: Replicate 2, Low Depth of Cut
Surface 29: Part 1: Replicate 3, Low Depth of Cut
Surface 29: Part 2: Replicate 3, Low Depth of Cut
Surface 30: Part 1: Replicate 1, Low Depth of Cut
Surface 30: Part 2: Replicate 1, Low Depth of Cut
Surface 30: Part 2: Replicate 2, Low Depth of Cut
Surface 30: Part 1: Replicate 3, Low Depth of Cut
Surface 30: Part 2: Replicate 3, Low Depth of Cut
Surface 31: Part 1: Replicate 1, Low Depth of Cut
Surface 31: Part 2: Replicate 1, Low Depth of Cut
Surface 31: Part 1: Replicate 2, Low Depth of Cut
Surface 31: Part 2: Replicate 2, Low Depth of Cut
Surface 31: Part 1: Replicate 3, Low Depth of Cut
Surface 31: Part 2: Replicate 3, Low Depth of Cut
Surface 32: Part 1: Replicate 1, Low Depth of Cut
Surface 32: Part 2: Replicate 1, Low Depth of Cut
Surface 32: Part 1: Replicate 2, Low Depth of Cut
Surface 32: Part 2: Replicate 2, Low Depth of Cut
Surface 32: Part 1: Replicate 3, Low Depth of Cut
Surface 32: Part 2: Replicate 3, Low Depth of Cut
Surface 33: Part 1: Replicate 1, Low Depth of Cut
Surface 33: Part 2: Replicate 1, Low Depth of Cut
Surface 33: Part 1: Replicate 2, Low Depth of Cut
Surface 33: Part 2: Replicate 2, Low Depth of Cut
Surface 33: Part 1: Replicate 3, Low Depth of Cut
Surface 33: Part 2: Replicate 3, Low Depth of Cut
Surface 34: Part 1: Replicate 1, Low Depth of Cut
Surface 34: Part 2: Replicate 1, Low Depth of Cut
Surface 34: Part 1: Replicate 2, Low Depth of Cut
Surface 34: Part 2: Replicate 2, Low Depth of Cut
Surface 34: Part 1: Replicate 3, Low Depth of Cut
Surface 34: Part 2: Replicate 3, Low Depth of Cut
Surface 35: Part 1: Replicate 1, Low Depth of Cut
Surface 35: Part 2: Replicate 1, Low Depth of Cut
Surface 35: Part 1: Replicate 2, Low Depth of Cut
Surface 35: Part 2: Replicate 2, Low Depth of Cut
Surface 35: Part 1: Replicate 3, Low Depth of Cut
Surface 35: Part 2: Replicate 3, Low Depth of Cut
Surface 36: Part 1: Replicate 1, Low Depth of Cut
Surface 36: Part 2: Replicate 1, Low Depth of Cut
Surface 36: Part 1: Replicate 2, Low Depth of Cut
Surface 36: Part 2: Replicate 2, Low Depth of Cut
Surface 36: Part 1: Replicate 3, Low Depth of Cut
Surface 36: Part 2: Replicate 3, Low Depth of Cut         Back To Top Of Page

DC SERVOMOTOR GEOMETRY SURFACE FINISH PARAMETERS

DC Servomotor Contour Geometry, High Depth of Cut (Surface 1-12)
DC Servomotor Contour Geometry, Central Depth of Cut (Surface 13-24)
DC Servomotor Contour Geometry, Low Depth of Cut (Surface 25-36)
DC Servomotor Straight/Taper Geometry, High Depth of Cut (Surface 1-12)
DC Servomotor Straight/Taper Geometry, Central Depth of Cut (Surface 13-24)
DC Servomotor Straight/Taper Geometry, Low Depth of Cut (Surface 25-36)    Back To Top Of Page

          (See "Surface Directory) for DC Servomotor Replicates)

PMBDCLM CONTOUR GEOMETRY SURFACE PROFILE

Surface 1: Part 1: Replicate 1, High Depth of Cut
Surface 2: Part 1: Replicate 1, High Depth of Cut
Surface 3: Part 1: Replicate 1, High Depth of Cut
Surface 4: Part 1: Replicate 1, High Depth of Cut
Surface 13: Part 1: Replicate 1, Central Depth of Cut
Surface 14: Part 1: Replicate 1, Central Depth of Cut
Surface 15: Part 1: Replicate 1, Central Depth of Cut
Surface 16: Part 1: Replicate 1, Central Depth of Cut
Surface 25: Part 1: Replicate 1, Low Depth of Cut
Surface 26: Part 1: Replicate 1, Low Depth of Cut
Surface 27: Part 1: Replicate 1, Low Depth of Cut
Surface 28: Part 1: Replicate 1, Low Depth of Cut

PMBDCLM STRAIGHT/TAPER SURFACE PROFILE

Surface 1: Part 1: Replicate 1, High Depth of Cut
Surface 2: Part 1: Replicate 1, High Depth of Cut
Surface 3: Part 1: Replicate 1, High Depth of Cut
Surface 4: Part 1: Replicate 1, High Depth of Cut
Surface 13: Part 1: Replicate 1, Central Depth of Cut
Surface 14: Part 1: Replicate 1, Central Depth of Cut
Surface 15: Part 1: Replicate 1, Central Depth of Cut
Surface 16: Part 1: Replicate 1, Central Depth of Cut
Surface 25: Part 1: Replicate 1, Low Depth of Cut
Surface 26: Part 1: Replicate 1, Low Depth of Cut
Surface 27: Part 1: Replicate 1, Low Depth of Cut
Surface 28: Part 1: Replicate 1, Low Depth of Cut             Back To Top Of Page