|
The New Jersey Institute of Technology's Electronic Theses & Dissertations Project
Chen, Rong-Yaw has served on the committee of
102 theses/dissertations that are available online.
* indicates that the advisor was committee chair or co-chair.
Author |
Degree |
Year |
|
Title |
ETD# |
Florio, Catherine Siena |
PhD |
© 2014 |
|
Computational optimization methods for modeling the effect of muscle forces on bone strength adaptation |
njit-etd2014-008 |
Jin, Quan |
PhD |
© 2007 |
|
Direct simulations of cells motions and deformations in flow |
njit-etd2007-049 |
Florio, Laurie Ann |
PhD |
© 2005 |
|
Investigation of static and dynamic enhancement of laminar natural convection cooling of electronics |
njit-etd2005-025 |
Lee, Tong Hoon |
PhD |
© 2005 |
|
Evaporating cross flow spray jets in gas-solid circulating fluidized bed |
njit-etd2005-076 |
Pang, Yunhong |
PhD |
© 2005 |
|
Simulation of creep in nickel based single crystal superalloys |
njit-etd2005-081 |
Yu, Qun |
PhD |
© 2005 |
|
Gas fluidization of nanoparticles |
njit-etd2005-090 |
Lee, Wen-Tzong |
PhD |
© 2004 |
|
The design of adjustable spherical mechanisms using plane-to-sphere and sphere-to-plane projections |
njit-etd2004-089 |
Liu, Jian |
PhD |
© 2004 |
|
Migration of an intruder particle in a boundary driven shear flow |
njit-etd2004-028 |
Yeo, Hyoung-Joo |
MS |
© 2004 |
|
Magneto-rheological fluid orthosis for suppressing tremor |
njit-etd2004-018 |
Zhu, Linjie |
PhD |
© 2004 |
|
3-D numerical simulation of reactive extrusion and its application to polymerization of [epsilon]-caprolactone in co-rotating twin-screw extruders |
njit-etd2004-099 |
Sweetman, Michael J. |
MS |
© 2003 |
|
Addition of a chain-cell search method and a Van der Waals force model to a particle dynamics code |
njit-etd2003-122 |
Pak, Kyung Geun |
PhD |
© 2002 |
|
Destructive disassembly of bolts and screws using impact |
njit-etd2002-051 |
Alcocer, Felix J. |
PhD |
© 2001 |
|
Numerical studies of Newtonian and viscoelastic fluids |
njit-etd2001-048 |
Chung, Youngjin |
PhD |
© 2001 |
|
Buckling of composite conical shells under combined axial compression, external pressure, and bending |
njit-etd2001-099 |
Guo, Jianxin |
PhD |
© 2001 |
|
Numerical stimulation of stress-induced crystallization of injection molded semicrystalline thermoplastics |
njit-etd2001-046 |
Russell, Kevin |
PhD |
© 2001 |
|
Kinematic synthesis of adjustable spatial four and five-bar mechanisms for finite and multiply separated positions |
njit-etd2001-051 |
Thipse, Sukrut S. |
PhD |
© 2001 |
* |
Parametric study of heavy metal partitioning in a pilot scale incinerator burning simulated municipal solid waste |
njit-etd2001-086 |
Chaudhuri, Bodhisattwa |
PhD |
© 2000 |
|
Simulation and modeling of magnetically-assisted impaction coating (MAIC) process for dry particle coating |
njit-etd2000-010 |
Gangwar, Hans Buus |
MS |
© 2000 |
|
General parallel-leg mechanism : position analysis |
njit-etd2000-054 |
Li, Zhigang |
PhD |
© 2000 |
|
Experimental studies and modeling of mechanical properties and morphologies of in situ polymer composites |
njit-etd2000-048 |
Wong, Wai-Kwong |
PhD |
© 2000 |
|
Axisymetric vibrations of homogeneous and sandwich spherical shells with a hole at the center |
njit-etd2000-040 |
Yin, Wenyue |
PhD |
© 2000 |
* |
Laminar viscous resuspension in two-dimensional channels |
njit-etd2000-035 |
Wang, Lei |
MS |
© 1999 |
|
An investigation of polyethylene bearing wear of New Jersey LCS knee on cobalt chromium and titanium nitride types |
njit-etd1999-105 |
Adams, Bart |
PhD |
© 1998 |
|
Automobile air bag inflation system using pressurized carbon dioxide |
njit-etd1998-034 |
Giorges, Aklilu T.G. |
PhD |
© 1998 |
|
Numerical study of three-dimensional free convection from semi-enclosed geometry and discontinuous heat sources |
njit-etd1998-060 |
Roy, Krishnendu |
MS |
© 1998 |
|
Object oriented 3D dynamic simulation of flow of material through hopper |
njit-etd1998-096 |
Sen, Sumit |
PhD |
© 1998 |
|
Robust fuzzyclustering for object recognition and classification of relational data |
njit-etd1998-099 |
Yao, Wen-Long |
PhD |
© 1998 |
|
Analytical and experimental study of investment casting with laser stereolithography models |
njit-etd1998-022 |
Cai, Hengming |
PhD |
© 1997 |
|
Analytical solutions of openings formed by intersection of a cylindrical shell and an oblique nozzle under internal pressure |
njit-etd1997-019 |
Fuchs, Brian Edward |
PhD |
© 1997 |
|
Shaped charges having a porous tungsten liner-an experimental and theoretical study of metal compression, jet formation and penetration mechanics |
njit-etd1997-053 |
Huang, Wai-Ting |
PhD |
© 1997 |
* |
Particle deposition from turbulent flow in a divergent channel |
njit-etd1997-058 |
Johnson, Michael Gunnar |
MS |
© 1997 |
|
Equivalent circuit analysis of a seventh order bandpass loudspeaker system |
njit-etd1997-059 |
Lavin, Thomas J. |
MS |
© 1997 |
|
Three-dimensional stress analysis of the femur with prosthetic hip stem utilizing computed tomography scans of the femur for geometry and material properties |
njit-etd1997-066 |
Parkin, Leonard Paul |
MS |
© 1997 |
* |
Computational determination of laminar flow loss coefficients in 90° channel bend |
njit-etd1997-024 |
Tabani, Yacoob |
PhD |
© 1997 |
|
Automobile air bag inflation system based on fast combustion reaction |
njit-etd1997-038 |
Weng, I-Chung |
PhD |
© 1997 |
|
The fatigue problems of cracks subjected to obliquely incident stress waves |
njit-etd1997-106 |
Jana, Amitava |
PhD |
© 1996 |
|
Real time control of nonlinear dynamic systems using neuro-fuzzy controllers |
njit-etd1996-037 |
Li, Fenggang |
PhD |
© 1996 |
|
Experimental and numerical investigation of abrasive waterjet polishing technology |
njit-etd1996-004 |
Loiacono, Pantaleo |
MS |
© 1996 |
* |
Implementation of Fortran finite element analysis source code with application : particle deposition in a 90 degree duct bend |
njit-etd1996-065 |
Meng, Ping |
PhD |
© 1996 |
|
Experimental and analytical investigation of waterjet cleaning process |
njit-etd1996-002 |
Rachoor, Hanuman |
PhD |
© 1996 |
|
Investigation of dynamic friction in lubricated surfaces |
njit-etd1996-029 |
Xu, James Jin |
PhD |
© 1996 |
|
Local stresses on lateral pipe-nozzle with 45 degree angle intersection |
njit-etd1996-112 |
Yung, Heng |
MS |
© 1996 |
|
Granular dynamics study of sieving |
njit-etd1996-114 |
Cao, Hong |
MS |
© 1995 |
|
Investigation of velocity distribution within high speed waterjet |
njit-etd1995-071 |
Dwivedi, Vivek P. |
MS |
© 1995 |
|
The effect of liquid gallium on plastics |
njit-etd1995-081 |
Fu, Tianxiong |
PhD |
© 1995 |
|
Robust approach to object recognition through fuzzy clustering and hough transform based methods |
njit-etd1995-050 |
Quan, Yu |
MS |
© 1995 |
|
Statistical and finite element analysis of the effects of random input parameters on the mechanical characteristics of sheetmetal forming processes using quadrature method |
njit-etd1995-107 |
Sun, Ding |
PhD |
© 1995 |
* |
Particle deposition on surfaces in a divergent channal flow |
njit-etd1995-061 |
Wang, Gang |
PhD |
© 1995 |
|
Analysis of plates and reinforced concrete columns by cubic b-spline function |
njit-etd1995-062 |
Wong, Hermrean |
PhD |
© 1995 |
|
Performance analysis for genetic algorithms. |
njit-etd1995-091 |
Zhang, Yahong |
MS |
© 1995 |
|
Chute flow experiments |
njit-etd1995-127 |
Aly, Atif |
MS |
© 1994 |
|
Dynamic friction measurement |
njit-etd1994-004 |
Chang, Shu-Chieh |
PhD |
© 1994 |
|
Adaptive nonlinear control using fuzzy logic and neural networks |
njit-etd1994-036 |
Chang, Wei-Chun |
PhD |
© 1994 |
|
Computer aided stress analysis of the femur with prosthetic hip stem utilizing computed tomography |
njit-etd1994-037 |
Chen, David Chihwei |
PhD |
© 1994 |
|
Local thermal stress factor of pipe-nozzle |
njit-etd1994-038 |
Ha, Jih-Lian Jack |
PhD |
© 1994 |
* |
Local stress factors of pipe-nozzle under internal pressure |
njit-etd1994-039 |
Jayabal, Sanjay |
MS |
© 1994 |
|
Remediation of contaminated sites using hot gas injection |
njit-etd1994-092 |
Khan, Md. Ekramul Hasan |
PhD |
© 1994 |
|
An investigation of the formation of turbulent water and abrasive water jets |
njit-etd1994-025 |
Lan, Yidan |
PhD |
© 1994 |
|
Particle dynamics modeling of vibrating granular beds |
njit-etd1994-027 |
Li, Zheng |
PhD |
© 1994 |
|
Improvement of waterjet and abrasive waterjet nozzle |
njit-etd1994-002 |
Munoz, Pedro Ricardo |
PhD |
© 1994 |
|
Behavior of biaxially loaded concrete-encased composite columns |
njit-etd1994-010 |
Yu, Chang-Hsin |
MS |
© 1994 |
|
Measurement of velocity of a high speed waterjet |
njit-etd1994-145 |
Chiou, Hsi-Chung |
PhD |
© 1993 |
* |
Deposition of particles in a convergent channel |
njit-etd1993-030 |
Cravo, Cesar A. |
MS |
© 1993 |
|
Performance of the stirling cycle thermal regenerator |
njit-etd1993-074 |
Dai, Dong |
MS |
© 1993 |
|
Entrance effects for short catalytic combustion monoliths |
njit-etd1993-075 |
Li, Jian |
MS |
© 1993 |
|
Forward kinematics solution of a special class of general stewart platforms |
njit-etd1993-106 |
Li, Ning |
MS |
© 1993 |
|
Modification of wear testing machine and study of wear resistance |
njit-etd1993-108 |
Lin, Junyu |
MS |
© 1993 |
|
Local stress factors of pipe-nozzle due to radial load, circumferential and longitudinal moments |
njit-etd1993-109 |
Liu, Hui-Jen |
MS |
© 1993 |
|
A simulation of a monitoring and alarm system in an energy management system |
njit-etd1993-113 |
Ma, Naijian |
MS |
© 1993 |
|
A mathematical model for the prediction of depth of cut in the course of AWJ machining |
njit-etd1993-010 |
Shih, I-Tsung |
PhD |
© 1993 |
|
Study of surface properties produced by magneto-plasma on nitriding for improving wear resistance |
njit-etd1993-045 |
Xu, Tianzong |
MS |
© 1993 |
|
Microstructural investigation of surface coating developed by electro-spark deposition technology |
njit-etd1993-164 |
Hsu, Lin Showmay |
PhD |
© 1992 |
|
Behavior of high strength concrete and slender reinforced concrete columns with and without steel fibers |
njit-etd1992-018 |
Jan, Tzy-Cherng |
PhD |
© 1992 |
|
Expert system for the injection molding of engineering thermoplastics |
njit-etd1992-012 |
Kim, Hyeong-Jin |
PhD |
© 1992 |
|
Particle dynamics modeling of boundary effects in granular couette flow |
njit-etd1992-011 |
Lin, E-Ping |
MS |
© 1992 |
|
Expert system for preventive maintenance the aluminum extrusion press and related equipment |
njit-etd1992-088 |
Liu, Chia-Ying |
PhD |
© 1992 |
|
Improving the throughput of plasticating extruders : manufacture of non-circular pellets, measurement of their interparticulate friction coefficient, and implications for screw design |
njit-etd1992-026 |
Lu, Guosheng |
MS |
© 1992 |
|
Local stress due to a radial loading at nozzle-pipe connection with different thickness |
njit-etd1992-091 |
Adavelly, Ranga Reddy V. |
MS |
© 1991 |
|
Analysis of the influence of natural wear and tear in gates and runners on the filling of a balanced multi-cavity injection mold |
njit-etd1991-074 |
Lyow, Ban-Li |
PhD |
© 1991 |
|
On local stresses and spring constants of a sphere-nozzle connection |
njit-etd1991-049 |
Chen, Wei-Long |
Dr. Eng. Sci. |
© 1990 |
|
Correlation between particle velocities and conditions of abrasive waterjet formation |
njit-etd1990-001 |
Khan, Md. Ekramul Hasan |
MS |
© 1990 |
|
An investigation of the dynamics of abrasive waterjet formation |
njit-etd1990-016 |
Sun, Hson-Chih |
PhD |
© 1991 |
|
On local stresses and spring constants of pipe-nozzle connection |
njit-etd1991-055 |
Suresh, Vallanore K. |
Dr. Eng. Sci. |
© 1989 |
|
Isoparametric finite elements for linear isotropic micropolar plate bending |
njit-etd1989-037 |
Chen, Win-Chung |
Dr. Eng. Sci. |
© 1986 |
* |
Deposition of particles in tubes due to gravity and electrostatic charges |
njit-etd1986-021 |
Chiu, Shyh-Rong |
MS |
© 1986 |
* |
Circular plate analysis using finite element method |
njit-etd1986-012 |
Cho, Chang Ho |
MS |
© 1986 |
|
Substructuring analysis for impact dynamics using ANSYS finite element package |
njit-etd1986-009 |
Huang, Fuang-Yuan |
Dr. Eng. Sci. |
© 1986 |
|
Two and three-dimensional isoparametric finite elements for axisymmetric micropolar elasticity |
njit-etd1986-014 |
Hui, Kwok Wah |
Dr. Eng. Sci. |
© 1986 |
* |
Deposition of suspensions in convergent channels due to electrostatic image forces |
njit-etd1986-020 |
Wong, Su-Bo |
MS |
© 1983 |
* |
One-dimensional compressible flow analysis : isentropic and normal shock |
njit-etd1983-012 |
Hollein, Helen Conway |
Dr. Eng. Sci. |
© 1982 |
|
Separation of proteins via pH parametric pumping with electric field |
njit-etd1982-010 |
Kuo, Ted Lai-Che |
Dr. Eng. Sci. |
© 1982 |
* |
Crimp-type electrical connectors |
njit-etd1982-007 |
Gelber, Melvin Wilbur |
Dr. Eng. Sci. |
© 1981 |
* |
Deposition of particles in vertical conduits due to electrostatic charge, diffusion, and gravity |
njit-etd1981-005 |
Li, Wayne Ke-Wung |
MS |
© 1979 |
|
A three-dimensional kinematic model of the human knee |
njit-etd1979-002 |
Korjack, Thomas Anthony |
Dr. Eng. Sci. |
© 1978 |
* |
Deposition of suspensions in laminar flow in the entrance region of channels with diffusive, electrostatic and gravitational effects |
njit-etd1978-002 |
Lee, Hsien-Chih |
MS |
© 1978 |
|
Semicontinous pH-parametric pump : experimental study |
njit-etd1978-010 |
Borhani, Mohammad A. |
Dr. Eng. Sci. |
© 1977 |
|
Thermal stratification and circulation of water bodies subjected to thermal discharge |
njit-etd1977-012 |
Eldighidy, Shawki Mahmoud |
Dr. Eng. Sci. |
© 1975 |
* |
Deposition of suspensions in laminar flow in the entrance region ofa channel and in a diffuser |
njit-etd1975-006 |
Ahmed, Zikri Mostafa |
MS |
© 1973 |
|
Separation of glucose - fructose - water systems via thermal parametric pumping |
njit-etd1973-011 |
Shilling, Norman |
Dr. Eng. Sci. |
© 1971 |
|
The effect of variable properties on the laminar flow of gases |
njit-etd1971-009 |
Levitt, Joseph Robert |
Dr. Eng. Sci. |
© 1970 |
|
Non-linear analysis of electrocardiogram tracings in detection of occult coronary artery disease |
njit-etd1970-004 |
Lee, David Tzeh-Hsian |
MS |
© 1969 |
|
Experimental investigation of submerged, incompressible, turbulent, impinging jets |
njit-etd1969-002 |
If you have any questions please contact the ETD Team, libetd@njit.edu.
Created 4/12/01; updated 8/30/02, 06/30/05
|
NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003
|
|