|
The New Jersey Institute of Technology's Electronic Theses & Dissertations Project
Harnoy, Avraham has served on the committee of
34 theses/dissertations that are available online.
* indicates that the advisor was committee chair or co-chair.
Author |
Degree |
Year |
|
Title |
ETD# |
Jij, Yanal |
MS |
© 2012 |
|
Dynamic friction: measurement and results |
njit-etd2012-035 |
Samardzic, Veljko |
PhD |
© 2008 |
|
Micro, meso and macro materials processing using high-speed liquid projectiles |
njit-etd2008-068 |
Florio, Laurie Ann |
PhD |
© 2005 |
* |
Investigation of static and dynamic enhancement of laminar natural convection cooling of electronics |
njit-etd2005-025 |
Bennett, Dawn J. |
PhD |
© 2004 |
|
Dielectrophoretic manipulation of biological and non-biological analytes in a microfluidic channel |
njit-etd2004-020 |
Titov, Andriy |
PhD |
© 2004 |
|
Effect of fullerene containing lubricants on wear resistance of machine components in boundary lubrication |
njit-etd2004-033 |
Markarian, Nikolai |
PhD |
© 2003 |
|
Theoretical and experimental studies of the field-induced phenomena in flowing suspensions |
njit-etd2003-080 |
Milovs, Vadims |
MS |
© 2003 |
* |
Computer simulation of automotive disc brake noise |
njit-etd2003-011 |
Babets, Konstantin |
PhD |
© 2001 |
|
Numerical modeling and optimization of waterjet based surface decontamination |
njit-etd2001-044 |
Roman, Max |
MS |
© 2001 |
* |
Dynamic friction of UHMWPE angular compliant bearing for joint implants and machinery |
njit-etd2001-037 |
Sridhar, Lakshminarayanan |
PhD |
© 1999 |
|
Investigation of thermal contact resistance at a plastic-metal interface in injection molding |
njit-etd1999-097 |
Cohn, Simon |
MS |
© 1998 |
* |
Dynamic friction measurement, modeling, and compensation for precise motion control |
njit-etd1998-005 |
Amin, Jayesh N. |
MS |
© 1996 |
|
Implementation of a friction estimation and compensation technique |
njit-etd1996-044 |
Li, Fenggang |
PhD |
© 1996 |
|
Experimental and numerical investigation of abrasive waterjet polishing technology |
njit-etd1996-004 |
Rachoor, Hanuman |
PhD |
© 1996 |
* |
Investigation of dynamic friction in lubricated surfaces |
njit-etd1996-029 |
Rahman, Sahidur |
PhD |
© 1996 |
|
Reduction of inertia-induced forces in a general spatial mechanism |
njit-etd1996-017 |
Essner, Aaron P. |
MS |
© 1995 |
|
The morphology of UHMWPE wear debris generated by a hip joint simulator |
njit-etd1995-025 |
Garofalo, Michael |
MS |
© 1995 |
* |
Viscoelastic effects on parallel flow stability, transition to turbulence, and turbulent flow |
njit-etd1995-083 |
Aly, Atif |
MS |
© 1994 |
* |
Dynamic friction measurement |
njit-etd1994-004 |
Khan, Md. Ekramul Hasan |
PhD |
© 1994 |
|
An investigation of the formation of turbulent water and abrasive water jets |
njit-etd1994-025 |
Mentzelopoulou, Sofia |
PhD |
© 1994 |
|
Estimation and cancellation of friction in control systems |
njit-etd1994-045 |
Wu, Yeou-Kai |
PhD |
© 1994 |
|
Motion synthesis of mechanisms using constraint manifolds in image space |
njit-etd1994-056 |
Chiou, Hsi-Chung |
PhD |
© 1993 |
|
Deposition of particles in a convergent channel |
njit-etd1993-030 |
Cravo, Cesar A. |
MS |
© 1993 |
|
Performance of the stirling cycle thermal regenerator |
njit-etd1993-074 |
Li, Jian |
MS |
© 1993 |
|
Forward kinematics solution of a special class of general stewart platforms |
njit-etd1993-106 |
Li, Ning |
MS |
© 1993 |
|
Modification of wear testing machine and study of wear resistance |
njit-etd1993-108 |
Xiao, Lan |
MS |
© 1993 |
|
Experimental investigation of submerged, turbulent, axisymmetric air jet impinging on a flat plate |
njit-etd1993-163 |
Chung, Yichung |
PhD |
© 1992 |
|
Development of prediction technique for the geometry of the abrasive waterjet generated kerf |
njit-etd1992-015 |
Kuriakose, Thomas |
MS |
© 1992 |
* |
A study of annular slurry jet for abrasive waterjet cutting |
njit-etd1992-009 |
Li, Hung-Yuan |
PhD |
© 1992 |
|
Investigation of waterjet-workpiece interaction |
njit-etd1992-001 |
Liu, Chia-Ying |
PhD |
© 1992 |
|
Improving the throughput of plasticating extruders : manufacture of non-circular pellets, measurement of their interparticulate friction coefficient, and implications for screw design |
njit-etd1992-026 |
Sambandan, Sivayasivan |
MS |
© 1992 |
|
Development of the interface between CAD and waterjet NC systems |
njit-etd1992-107 |
Wei, Ching-Hua |
PhD |
© 1991 |
|
Investigation of stagnation flow heat transfer for a heated horizontal round plate |
njit-etd1991-052 |
Chen, Wei-Long |
Dr. Eng. Sci. |
© 1990 |
|
Correlation between particle velocities and conditions of abrasive waterjet formation |
njit-etd1990-001 |
Li, Hung-Yuan |
MS |
© 1988 |
|
Investigation of forces in the course of the water jet--work piece interaction |
njit-etd1988-026 |
If you have any questions please contact the ETD Team, libetd@njit.edu.
Created 4/12/01; updated 8/30/02, 06/30/05
|
NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003
|
|