The New Jersey Institute of Technology's Electronic Theses & Dissertations Project

Ji, Zhiming
has served on the committee of
95 theses/dissertations that are available online.

* indicates that the advisor was committee chair or co-chair.

Author	Degree	Year		Title	ETD#
Deng, Hongling	PhD	© 2023	*	Depressurization characteristics of steam-based reciprocating vacuum pump	njit-etd2023-054
Ding, Caiwu	PhD	© 2022		Design and control of next-generation uavs for effectively interacting with environments	njit-etd2022-018
Das, Suchandra	PhD	© 2021		Electric field induced self-assembly of mesoscale structured materials and smart fluids	njit-etd2021-037
Guo, Guangyu	PhD	© 2021	*	A vacuum-driven distillation technology of aqueous solutions and mixtures	njit-etd2021-065
Shan, Pinyuan	PhD	© 2021		Constructive solution methodologies to the capacitated newsvendor problem and surrogate extension	njit-etd2021-087
Kahali, Sudeepto	PhD	© 2020	*	Blast shock-wave characterization in experimental shock tubes	njit-etd2020-104
Li, Jiawei	PhD	© 2020		Human-robot interaction for assistive robotics	njit-etd2020-063
Rawal, Abhi J.	MS	© 2020		Cycloidal-drive joint design for wearable exoskeletons	njit-etd2020-080
Wright, Joseph M.	PhD	© 2020		A comprehensive and absolute corporate sustainability assessment and enhanced input output life cycle assessment	njit-etd2020-039
Dhankecha, Nil B.	MS	© 2019		Effect of turbostratic orientations and confined fluid on mechanical strength of bi-layer graphene: a molecular dynamics study	njit-etd2019-051
Prasad Varghese, Allen	MS	© 2019		Mechanical design automation: a case study on plastic extrusion die tooling	njit-etd2019-054
Gao, Feng	PhD	© 2018		Experimental and numerical characterization of multiphase subsurface oil release	njit-etd2018-081
Nunna, Bharath Babu	PhD	© 2018		Microfluidic biosensor with functionalized gold nano particles on interdigitated electrodes	njit-etd2018-085
Arif, Tariq Mohammad	PhD	© 2017	*	Fast estimation model of pressure-temperature response for planning focused ultrasound surgery	njit-etd2017-088
Zhang, Bo	PhD	© 2017		Aerosol transport by coughing in a depressurized and air-conditioned chamber	njit-etd2017-008
Zhang, Jingran	PhD	© 2017		Decision models for fast-fashion supply and stocking problems in internet fulfillment warehouses	njit-etd2017-098
Siddabattuni, Praveen Kumar Baba	MS	© 2016		Shock wave interaction with a fluid filled cylinder experimental methods	njit-etd2016-021
Kahali, Sudeepto	MS	© 2015		Effect of endplate on the blast wave profile in a compressed gas shock tube	njit-etd2015-099
Florio, Catherine Siena	PhD	© 2014		Computational optimization methods for modeling the effect of muscle forces on bone strength adaptation	njit-etd2014-008
He, Pengfei	PhD	© 2014		Gas-solid transport and reaction via intervened evaporating sprays	njit-etd2014-047
Kwadzogah, Roger Kobla	PhD	© 2014		Modeling, control and simulation of control-affine nonlinear systems with state-dependent transfer functions	njit-etd2014-052
Choi, Jin Soo	PhD	© 2012		Wireless sensor network for health monitoring	njit-etd2012-016
Du, Fen	PhD	© 2012	*	Design and automated operation of a condensation-induced depressurization system	njit-etd2012-061
Shi, Wei	PhD	© 2012		Advanced intelligent control and optimization for cardiac pacemaker systems	njit-etd2012-043
Yu, Lan	PhD	© 2011		Model reference control for ultra-high precision positioning systems	njit-etd2011-024
Khanolkar, Mahesh	PhD	© 2010		Constitutive modeling of glassy memory polymers	njit-etd2010-096
Manna, Yazan Ahmad	PhD	© 2010	*	Motion coordination and control in the development of a gait rehabilitation system	njit-etd2010-027
Olapiriyakul, Sun	PhD	© 2010		End-of-life analysis of nanotechnology products	njit-etd2010-025
Peng, Chong	PhD	© 2010		Optimal synthesis of planar adjustable mechanisms	njit-etd2010-033
Al-Smadi, Yahia Mohammad	PhD	© 2009		Kinematic synthesis of planar four bar and geared five bar mechanisms with structural constraints	njit-etd2009-001
Nudurupati, Sai C.	PhD	© 2009		Electrohydrodynamic manipulation of multiphase fluids	njit-etd2009-073
Pletenetskyy, Andriy	MS	© 2008	*	Design of gait rehabilitation system	njit-etd2008-021
Shen, Qiong	PhD	© 2008	*	Multi-functional, self-sensing and automated real-time non-contact liquid dispensing system	njit-etd2008-109
Banerjee, Amit	PhD	© 2005		Robust techniques and applications in fuzzy clustering	njit-etd2005-126
Manna, Yazan Ahmad	MS	© 2005	*	A gait generation mechanism for leg rehabilitation therapy	njit-etd2005-109
Yeo, Hyoung-Joo	MS	© 2004		Magneto-rheological fluid orthosis for suppressing tremor	njit-etd2004-018
Milovs, Vadims	MS	© 2003		Computer simulation of automotive disc brake noise	njit-etd2003-011
Sweetman, Michael J.	MS	© 2003		Addition of a chain-cell search method and a Van der Waals force model to a particle dynamics code	njit-etd2003-122
Shishkin, Dimitri V.	PhD	© 2002		Development of icejet-based surface processing technology	njit-etd2002-087
Babets, Konstantin	PhD	© 2001		Numerical modeling and optimization of waterjet based surface decontamination	njit-etd2001-044
Luo, Yanchun	PhD	© 2001	*	Integration of e-business strategy for multi-lifecycle production systems	njit-etd2001-103
Ma, Jun	MS	© 2001		Mechanical design of the heater used in near infrared filter	njit-etd2001-039
Russell, Kevin	PhD	© 2001		Kinematic synthesis of adjustable spatial four and five-bar mechanisms for finite and multiply separated positions	njit-etd2001-051
Sonnenberg, Manuela	PhD	© 2001		Force and effort analysis of unfastening actions in disassembly processes	njit-etd2001-084
Sun, Xuemei	PhD	© 2001		Analysis and control of monolithic piezoelectric nano-actuator	njit-etd2001-056
Gangwar, Hans Buus	MS	© 2000	*	General parallel-leg mechanism : position analysis	njit-etd2000-054
Li, Zhenqun	PhD	© 2000	*	Reconfiguration and tool path planning of hexapod machine tools	njit-etd2000-058
Li, Zhigang	PhD	© 2000		Experimental studies and modeling of mechanical properties and morphologies of in situ polymer composites	njit-etd2000-048
Maiteh, Bilal Yehya	PhD	© 2000		Virtual reality based creation of concept model designs for CAD systems	njit-etd2000-026
Will, Mark	MS	© 2000		Gait development for use in dynamic gait optimization of qudrupedrobot walking	njit-etd2000-093
Yang, Bo	PhD	© 2000		Rapid tooling by integration of solid freedom fabrication and electrodepostion	njit-etd2000-034
Dani, Bhaskar Vinayak	MS	© 1999		Vibration control of ultra-high precision magnetic leadscrew using recurrent neural network	njit-etd1999-053
Shishkin, Dimitri V.	MS	© 1999		Development of icejet machining technology	njit-etd1999-013
Sridhar, Lakshminarayanan	PhD	© 1999		Investigation of thermal contact resistance at a plastic-metal interface in injection molding	njit-etd1999-097
Cohn, Simon	MS	© 1998		Dynamic friction measurement, modeling, and compensation for precise motion control	njit-etd1998-005
Ellis, Robert	MS	© 1998		Optimal synthesis of a planar four-bar function generator based on imderect measure of structural error	njit-etd1998-055
Hanesian, Laurel A.	MS	© 1998		Parameter optimization for curl distortion in building parts using 3-D laser stereolithography	njit-etd1998-063
Raj, Narendra P.	MS	© 1998		Demanufacturing metrics for industrial fasteners and disassembly process	njit-etd1998-092
Sen, Sumit	PhD	© 1998		Robust fuzzyclustering for object recognition and classification of relational data	njit-etd1998-099
Yao, Wen-Long	PhD	© 1998		Analytical and experimental study of investment casting with laser stereolithography models	njit-etd1998-022
Cai, Hengming	PhD	© 1997		Analytical solutions of openings formed by intersection of a cylindrical shell and an oblique nozzle under internal pressure	njit-etd1997-019
Johnson, Michael Gunnar	MS	© 1997		Equivalent circuit analysis of a seventh order bandpass loudspeaker system	njit-etd1997-059
Lu, Feng	MS	© 1997		Modeling of deformed swept volumes with SDE and its applications to NC simulation and verification	njit-etd1997-071
Phansalkar, Girish	MS	© 1997		Modeling of objects using planar facets in noisy range images	njit-etd1997-084
Song, Philip	MS	© 1997	*	Mechanical design of an experimental parallel robot	njit-etd1997-093
Wang, Liping	PhD	© 1997		Modeling of 3D swept volumes using sde/sede methods and its application to five-axis nc machining	njit-etd1997-105
Weng, I-Chung	PhD	© 1997	*	The fatigue problems of cracks subjected to obliquely incident stress waves	njit-etd1997-106
Jana, Amitava	PhD	© 1996		Real time control of nonlinear dynamic systems using neuro-fuzzy controllers	njit-etd1996-037
Kim, Tea-Quin	PhD	© 1996		Global fuzzy control based on cell mapping	njit-etd1996-092
Meng, Ping	PhD	© 1996		Experimental and analytical investigation of waterjet cleaning process	njit-etd1996-002
Rachoor, Hanuman	PhD	© 1996		Investigation of dynamic friction in lubricated surfaces	njit-etd1996-029
Rahman, Sahidur	PhD	© 1996		Reduction of inertia-induced forces in a general spatial mechanism	njit-etd1996-017
Cao, Hong	MS	© 1995		Investigation of velocity distribution within high speed waterjet	njit-etd1995-071
Dwivedi, Vivek P.	MS	© 1995		The effect of liquid gallium on plastics	njit-etd1995-081
Fu, Tianxiong	PhD	© 1995		Robust approach to object recognition through fuzzy clustering and hough transform based methods	njit-etd1995-050
Kliminski, John D.	MS	© 1995		A general method for the inverse kinematics of rotational displacements in spatial mechanisms	njit-etd1995-068
Kurapati, Venkatesh	PhD	© 1995		A petri-net based methodology for modeling, simulation, and control of flexible manufacturing systems	njit-etd1995-021
Liao, Hsin-Te	PhD	© 1995		Vibration as an aid in robotic peg-in-hole assembly	njit-etd1995-057
Wong, Hermrean	PhD	© 1995		Performance analysis for genetic algorithms.	njit-etd1995-091
Chanda, Rajesh	MS	© 1994	*	Base plate placement for a predefined workspace of a Stewart platform parallel manipulator	njit-etd1994-073
Chang, Shu-Chieh	PhD	© 1994		Adaptive nonlinear control using fuzzy logic and neural networks	njit-etd1994-036
Li, Zheng	PhD	© 1994		Improvement of waterjet and abrasive waterjet nozzle	njit-etd1994-002
Momplaisir, Fritz Gerald	MS	© 1994		Design of an autonomous vehicle system	njit-etd1994-007
Raja, Giridhar	MS	© 1994		A knowledge-based designer assistant system with application to the design of helical springs	njit-etd1994-120
Singh, Gurinder Pal	MS	© 1994		Semi-automated approach to shape optimal design of planar structures	njit-etd1994-129
Xie, Chao	MS	© 1994	*	Analysis for handling flexible green sheets with automated tools	njit-etd1994-143
Atre, Ajey S.	MS	© 1993		Detection of planar facets in noisy range images	njit-etd1993-062
Li, Jian	MS	© 1993	*	Forward kinematics solution of a special class of general stewart platforms	njit-etd1993-106
Ma, Naijian	MS	© 1993		A mathematical model for the prediction of depth of cut in the course of AWJ machining	njit-etd1993-010
Ozsoylu, Suat Ali	PhD	© 1993		Analysis of a band-saw	njit-etd1993-040
Surjanhata, Herli	PhD	© 1993		On orthogonal collocation solutions of partial differential equations	njit-etd1993-022
Wang, Shao Jie	PhD	© 1993		Kinematic synthesis of adjustable four-bar mechanisms for multi-phase motion generation	njit-etd1993-047
Zhou, Gongyao	PhD	© 1993		Statistical, random and fractal characterizations of surface topography with engineering applications	njit-etd1993-011
Chung, Yichung	PhD	© 1992		Development of prediction technique for the geometry of the abrasive waterjet generated kerf	njit-etd1992-015
Sambandan, Sivayasivan	MS	© 1992		Development of the interface between CAD and waterjet NC systems	njit-etd1992-107

---

If you have any questions please contact the ETD Team, libetd@njit.edu.

Created 4/12/01; updated 8/30/02, 06/30/05