|
The New Jersey Institute of Technology's Electronic Theses & Dissertations Project
Dreyzin, Edward L. has served on the committee of
53 theses/dissertations that are available online.
* indicates that the advisor was committee chair or co-chair.
Author |
Degree |
Year |
|
Title |
ETD# |
Mursalat, Mehnaz |
PhD |
© 2022 |
* |
Effect of process control agents used in mechanochemical synthesis on properties of the prepared composite reactive materials |
njit-etd2022-023 |
Hastings, Daniel |
PhD |
© 2021 |
* |
Feedstock powders for reactive structural materials |
njit-etd2021-043 |
Maximov, Max A. |
PhD |
© 2021 |
|
Advances in modeling gas adsorption in porous materials for the characterization applications |
njit-etd2021-045 |
Valluri, Siva Kumar |
PhD |
© 2021 |
* |
Fluorine-based inorganic oxidizers for use in metal-based reactive materials |
njit-etd2021-018 |
Enekwizu, Ogochukwu Yvonne |
PhD |
© 2020 |
|
The aging and impacts of atmospheric soot: closing the gap between experiments and models |
njit-etd2020-090 |
Gandhi, Purvam Mehulkumar |
MS |
© 2020 |
* |
Preparation and characterization of reactive composites combining boron with mixed oxides |
njit-etd2020-073 |
Ji, Shen |
PhD |
© 2020 |
|
Development of novel inks and approaches for printing tissues and organs |
njit-etd2020-061 |
Chintersingh, Kerri-lee Annique |
PhD |
© 2019 |
* |
Improving boron for combustion applications |
njit-etd2019-042 |
Liu, Xinhang |
PhD |
© 2019 |
* |
Customized boron and magnesium-based reactive materials prepared by high energy mechanical milling |
njit-etd2019-062 |
Yao, Zhenhua |
PhD |
© 2019 |
|
N8- polynitrogen stabilized on carbon-based supports as metal-free electrocatalyst for oxygen reduction reaction in fuel cells |
njit-etd2019-084 |
Lagoviyer, Oleg Shlomo |
MS |
© 2018 |
* |
Mechanochemical nitration of aromatic compounds |
njit-etd2018-007 |
Monk, Ian |
PhD |
© 2018 |
* |
Combustion of nanocomposite thermite powders |
njit-etd2018-028 |
Pham, Quang Long |
PhD |
© 2018 |
|
The cooperative effects of channel length-bias, width asymmetry, gradient steepness, and contact-guidance on fibroblasts’ directional decision making |
njit-etd2018-060 |
Huang, Ci |
MS |
© 2017 |
|
Nanocomposite thermite powders with improved flowability prepared by mechanical milling |
njit-etd2017-072 |
Zhu, Yuan |
PhD |
© 2017 |
|
CO2 reduction over noble metal/carbon nanotube catalyst |
njit-etd2017-122 |
Abraham, Ani |
PhD |
© 2016 |
* |
Custom engineered nanomaterials for energetics and energy applications |
njit-etd2016-045 |
Deng, Xiaoliang |
PhD |
© 2016 |
|
Understanding bulk behavior of particulate materials from particle scale simulations |
njit-etd2016-004 |
Nie, Hongqi |
PhD |
© 2016 |
* |
Oxidation kinetics of metallic powders |
njit-etd2016-038 |
Valluri, Siva Kumar |
MS |
© 2016 |
* |
Development and analysis of aluminum-PTFE reactive composite material |
njit-etd2016-061 |
Zhong, Ziyue |
MS |
© 2016 |
* |
Preparation, ignition and combustion of reactive metal-sulfur nanocomposites |
njit-etd2016-064 |
Corcoran, Amy Lee |
MS |
© 2015 |
* |
Combustion dynamics of metal powders in mixed gas flows |
njit-etd2015-004 |
Aly, Yasmine |
PhD |
© 2014 |
* |
Synthesis and characterization of metal-based reactive powders |
njit-etd2014-093 |
Santhanam, Priya Radhi |
PhD |
© 2014 |
* |
Discrete element method based scale-up model for material synthesis using ball milling |
njit-etd2014-019 |
Vummidi Lakshman, Shashank |
PhD |
© 2014 |
* |
Evaluation of environmental materials as thermal witness materials |
njit-etd2014-099 |
Wang, Song |
MS |
© 2014 |
* |
Combustion of fine magnesium particles |
njit-etd2014-078 |
Williams, Rayon |
PhD |
© 2014 |
* |
Ignition mechanism in nanocomposites thermites |
njit-etd2014-100 |
Afolabi, Afolawemi |
PhD |
© 2013 |
|
Batch and continuous production of stable dense suspensions of drug nanoparticles in a wet stirred media mill |
njit-etd2013-113 |
Han, Xi |
PhD |
© 2013 |
|
Particle engineering via surface modification during micronization for pharmaceutical applications |
njit-etd2013-021 |
Yildiz, Deniz |
MS |
© 2013 |
* |
Heterogeneous combustion of condensed particles in transition regime |
njit-etd2013-035 |
Zhang, Shasha |
PhD |
© 2013 |
* |
Metal based reactive nanocomposites prepared by cryomilling |
njit-etd2013-095 |
Zhu, Yuan |
MS |
© 2013 |
|
Methane partial oxidation over phthalocyanine catalyst |
njit-etd2013-033 |
Badiola, Carlo Francisco |
MS |
© 2012 |
* |
Combustion dynamics of individual reactive material particles |
njit-etd2012-021 |
Beloni, Ervin |
PhD |
© 2011 |
* |
Study of the heating and ignition of metal powder by electrostatic discharge |
njit-etd2011-046 |
Stamatis, Demitrios |
PhD |
© 2011 |
* |
Multifunctional reactive nanocomposite materials |
njit-etd2011-117 |
Mohan, Salil |
PhD |
© 2009 |
* |
Experiment and modeling : ignition of aluminum particles with a CO2 laser |
njit-etd2009-010 |
Beloni, Ervin |
MS |
© 2008 |
* |
Ignition of metal powder by electrostatic discharge stimulation |
njit-etd2008-005 |
Lin, Kuan-Yin |
PhD |
© 2008 |
|
Novel polypropylene based microporous membranes via spherulitic deformation |
njit-etd2008-107 |
Stamatis, Demitrios |
MS |
© 2008 |
* |
Fully dense aluminum-rich aluminum copper oxide powders for energetic formulations |
njit-etd2008-026 |
Gokhale, Abhijit Aniruddha |
PhD |
© 2007 |
|
Nanoparticle formation and coating using supercritical fluids |
njit-etd2007-019 |
Rafique Qureshi, Muhammad Mushahid |
PhD |
© 2007 |
|
Flow characteristics and phase interactions of evaporating sprays in gas-solid suspensions |
njit-etd2007-027 |
Umbrajkar, Swati M. |
PhD |
© 2007 |
* |
Synthesis and analysis of reactive nanocomposites prepared by arrested reactive milling |
njit-etd2007-057 |
Barrow, Ryan |
MS |
© 2006 |
|
Dry magnetic assisted impaction mixing of sub-micron boron and barium chromate for a time delay composition |
njit-etd2006-050 |
Trunov, Mikhaylo Aleksiyovych |
PhD |
© 2006 |
* |
Effect of polymorphic phase transformations within an alumina layer on the ignition of aluminum particles |
njit-etd2006-086 |
Zhu, Xiaoying |
PhD |
© 2006 |
* |
Synthesis and characterization of mechanically alloyed aluminum-based compounds as high energy density materials |
njit-etd2006-094 |
Ermoline, Alexandre |
PhD |
© 2005 |
* |
Experimental technique for studying high-temperature phase equilibria in reactive molten metal based systems |
njit-etd2005-023 |
Ward, Trent Stanton |
MS |
© 2005 |
* |
Heat transfer model for the ignition of metal powder on a heated filament |
njit-etd2005-060 |
Bennett, Dawn J. |
PhD |
© 2004 |
|
Dielectrophoretic manipulation of biological and non-biological analytes in a microfluidic channel |
njit-etd2004-020 |
Eapen, Binu Zacharia |
MS |
© 2004 |
* |
Combustion of aerosolized spherical aluminum powders and flakes in air |
njit-etd2004-003 |
Mohan, Salil |
MS |
© 2004 |
* |
Characterization of aluminum powder ignition |
njit-etd2004-009 |
Liu, Guangliang |
PhD |
© 2003 |
|
Evaporating crossflow sprays in gas-solid flows |
njit-etd2003-025 |
Mudryy, Ruslan |
MS |
© 2003 |
* |
Experimental study of ignition of mechanical alloy and pure metal powders |
njit-etd2003-012 |
Roman, Max |
MS |
© 2001 |
|
Dynamic friction of UHMWPE angular compliant bearing for joint implants and machinery |
njit-etd2001-037 |
Thipse, Sukrut S. |
PhD |
© 2001 |
* |
Parametric study of heavy metal partitioning in a pilot scale incinerator burning simulated municipal solid waste |
njit-etd2001-086 |
If you have any questions please contact the ETD Team, libetd@njit.edu.
Created 4/12/01; updated 8/30/02, 06/30/05
|
NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003
|
|