|
The New Jersey Institute of Technology's Electronic Theses & Dissertations Project
Herman, Harry has served on the committee of
27 theses/dissertations that are available online.
* indicates that the advisor was committee chair or co-chair.
Author |
Degree |
Year |
|
Title |
ETD# |
Chao, Jo-fei |
PhD |
© 1993 |
|
Investigation of the striation formation in the course of abrasive waterjet cutting |
njit-etd1993-052 |
Ozsoylu, Suat Ali |
PhD |
© 1993 |
* |
Analysis of a band-saw |
njit-etd1993-040 |
Surjanhata, Herli |
PhD |
© 1993 |
* |
On orthogonal collocation solutions of partial differential equations |
njit-etd1993-022 |
Wang, Shao Jie |
PhD |
© 1993 |
|
Kinematic synthesis of adjustable four-bar mechanisms for multi-phase motion generation |
njit-etd1993-047 |
Liou, Che-Chen |
PhD |
© 1992 |
|
Structural reliability using finite element method |
njit-etd1992-014 |
Lu, Guosheng |
MS |
© 1992 |
|
Local stress due to a radial loading at nozzle-pipe connection with different thickness |
njit-etd1992-091 |
Lyow, Ban-Li |
PhD |
© 1991 |
|
On local stresses and spring constants of a sphere-nozzle connection |
njit-etd1991-049 |
Dhaliwal, Jaskaran Singh |
MS |
© 1990 |
|
A comparative study of edge detection techniques |
njit-etd1990-003 |
Sun, Hson-Chih |
PhD |
© 1991 |
|
On local stresses and spring constants of pipe-nozzle connection |
njit-etd1991-055 |
Dastane, Ajit Nachiket |
MS |
© 1989 |
|
Design of a gear driven anti-twister mechanism for a seal-less blood processor |
njit-etd1989-024 |
Kim, Hyoung Jun |
Dr. Eng. Sci. |
© 1989 |
|
Kinematic synthesis of mechanisms for multiply separated positions |
njit-etd1989-035 |
Kim, Jaeho |
Dr. Eng. Sci. |
© 1989 |
* |
Close-range, noncontact distance measurement by controlled image irradiance |
njit-etd1989-036 |
Suresh, Vallanore K. |
Dr. Eng. Sci. |
© 1989 |
|
Isoparametric finite elements for linear isotropic micropolar plate bending |
njit-etd1989-037 |
Liu, Wen-Tsia |
Dr. Eng. Sci. |
© 1988 |
|
A feasible direction procedure for general multiple objective optimization |
njit-etd1988-029 |
Makris, Georghios |
MS |
© 1986 |
* |
A tracheoesophageal puncture voice prosthesis |
njit-etd1986-003 |
Cohen, Robert C. |
MS |
© 1984 |
|
Finite element modeling of a femoral stem in a total hip prosthesis |
njit-etd1984-005 |
Ramamurthy, Ghandikota |
MS |
© 1983 |
|
Finite element analysis of the femoral head |
njit-etd1983-005 |
Juliano, Thomas Michael |
Dr. Eng. Sci. |
© 1979 |
|
Inplane and out of plane buckling of thick rings subjected to hydrostatic pressure |
njit-etd1979-005 |
Li, Wayne Ke-Wung |
MS |
© 1979 |
|
A three-dimensional kinematic model of the human knee |
njit-etd1979-002 |
Chu, Kerry Kier-ten |
Dr. Eng. Sci. |
© 1978 |
|
Dynamics of submerged cylindrical shells with eccentric stiffening |
njit-etd1978-003 |
Moradi, Jacob Yaghoub |
Dr. Eng. Sci. |
© 1977 |
|
A fast boundary tracking alogorithm for constrained nonlinear mathematical programming problems |
njit-etd1977-015 |
Batiwalla, Bomi |
Dr. Eng. Sci. |
© 1972 |
|
Vibration and buckling of elastic plates with shear and rotatory inertia |
njit-etd1972-011 |
Fox, Alfred |
MS |
© 1972 |
* |
The creep and stress relaxation behavior of silver bearing copper wire |
njit-etd1972-006 |
De Capua, Nicholas J. |
Dr. Eng. Sci. |
© 1971 |
|
Transverse vibration of a class of orthotropic plates |
njit-etd1971-005 |
Carman, Richard Clement |
Dr. Eng. Sci. |
© 1970 |
|
On the classification of the solution space of linear anisotropic elasticity |
njit-etd1970-010 |
Prendergast, Francis X. |
Dr. Eng. Sci. |
© 1970 |
* |
Extension and application of the Sedov-Berdichevskii variational principle |
njit-etd1970-007 |
Schroll, Kenneth Roy |
Dr. Eng. Sci. |
© 1970 |
|
Dynamic stress concentrations about an epilliptical discontinuity in an elastic solid |
njit-etd1970-012 |
If you have any questions please contact the ETD Team, libetd@njit.edu.
Created 4/12/01; updated 8/30/02, 06/30/05
|
NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003
|
|