Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/theses/150 in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: Methane partial oxidation over phthalocyanine catalyst
Author: Zhu, Yuan
View Online: njit-etd2013-033
(xiv, 80 pages ~ 1.8 MB pdf)
Department: Department of Chemical, Biological and Pharmaceutical Engineering
Degree: Master of Science
Program: Chemical Engineering
Document Type: Thesis
Advisory Committee: Barat, Robert Benedict (Committee chair)
Dreyzin, Edward L. (Committee member)
Wang, Xianqin (Committee member)
Date: 2013-05
Keywords: Methane oxidation
Partial oxidation reaction
Availability: Unrestricted
Abstract:

The partial oxidation reaction of methane over a zeolite-supported ruthenium phthalocyanine catalyst is studied in a packed bed reactor. The investigation of such reaction is desirable because partial oxidation of methane yields a synthesis gas that can be upgraded to liquid chemicals and fuels.

Reactants of this study are He-diluted CH4 and O2. The effluent includes unreacted CH4 and O2, He, CO, CO2, H2, and H2O vapor. Thermal conductivity gas chromatography is applied to identify the mole fractions of reactants and products. System pressure is maintained at 50 psig. Experiments are run at 250, 275, 300, 325, 350, and 375°C. For each temperature, the feed molar ratio of CH4/O2 is varied from 0.5 to 5.0.

Although reaction temperature is more than 200°C lower than that of common catalytic methane partial oxidation, conversion of methane is obvious. Product analysis indicates that the highest conversion is 80.4% at 375°C, CH4/O2=0.5. Conversion of methane increases with increasing temperature, but it decreases with increasing molar ratio CH4/O2. Selectivities of both H2 and CO increase with the increasing temperature or molar ratio CH4/O2. But selectivity of CO2 decreases with the increasing temperature or molar ratio CH4/O2.

Based on a differential packed bed reactor model, the global rate of CH4 reaction shows first order dependencies on each of O2 and CH4. The overall reaction rate is a second-order reaction. The reaction rate constant k for each temperature was also determined. An Arrhenius plot of the global rate constants suggest that the reaction is limited by reaction kinetics between 250-300°C, and limited by mass transfer between 300-375°C. Equilibrium calculations are also made for all cases in this study. The result shows that products selectivities of equilibrium calculation are significantly different from that of catalytic reactions, which emphasizes the effective catalytic actions of the zeolite-supported ruthenium phthalocyanine.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003