Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/dissertations/349 in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: Particle engineering via surface modification during micronization for pharmaceutical applications
Author: Han, Xi
View Online: njit-etd2013-021
(xv, 170 pages ~ 5.6 MB pdf)
Department: Department of Chemical, Biological and Pharmaceutical Engineering
Degree: Doctor of Philosophy
Program: Chemical Engineering
Document Type: Dissertation
Advisory Committee: Dave, Rajesh N. (Committee chair)
Bilgili, Ecevit Atalay (Committee member)
Loney, Norman W. (Committee member)
Dreyzin, Edward L. (Committee member)
Iqbal, Zafar (Committee member)
Date: 2013-01
Keywords: Particle engineering
Dry coating
Powder flow
Blends
Fine cohesive powder
Tabletting
Availability: Unrestricted
Abstract:

Improving the dissolution rate of Biopharmaceutics Classification System (BCS) class II drugs is an important research area. Micronization which can increase the specific surface area is a promising method to improve the dissolution rate. Micronization alone, however, can lead to downstream processing problems related to poor flow and dispersion properties. The importance of the flowability of pharmaceutical powders is well-documented in the literature. It is, therefore, important to develop a method that can simultaneously overcome these processing issues and allow for micronizing the API. In this work, dry particle coating technique is investigated in the context of micronizing API powders and overcoming problems associated with the micronized fine powders due to their strong cohesive forces. Consequently, the main objective of this dissertation is to investigate if simultaneous micronization and dry coating process (SM-DC) is beneficial for pharmaceutical applications. The work addresses and answers several important issues as discussed next.

First, using ibuprofen as a test-case, it is shown that flow properties and dissolution rate were significantly improved when micronization was performed along with dry coating (SM-DC process). Additionally, co-grinding with water-soluble polymer during micronization was considered and led to further dissolution rate improvement and increased bulk density. The surface modified, micronized powders also showed improved dispersion, significantly higher bulk densities, reduced electrostatic charging, and higher flowability compared to the pure micronized sample. Next, these dry coated fine API powders were formulated into blends with different API loadings. The results showed that the blends containing dry coated API powders had excellent flowability and high bulk density. In contrast, blends containing uncoated APIs had poor flow and lower bulk densities. As the API loading increased, the difference between dry coated and uncoated blends was more pronounced. Tablets prepared from dry coated API blends exhibited superior compactibility and dissolution profiles, particularly for higher drug loadings. This illustrated the advantages of the dry coating during API micronization, without any adverse impact on tabletting operations and tablet properties. Next, an in-depth understanding of the effect of milling and dry coating on the surface properties of milled ibuprofen powders was investigated. Inverse Gas Chromatography technique was used and the dispersive surface energy of pure milled powders was heterogeneous in nature. In contrast, dry coating with nano-particles was found to quench the high energy sites and make the surface energy of the powders comparatively uniform and the average values similar to that of the nano-particle used for the dry coating. Last, a simple shear test based method was developed to estimate the granular Bond number to evaluate the performance of dry coating. This technique eliminates the usual need of detailed, time consuming particle scale characterization via atomic force microscopy. Estimated Bond numbers were compared and verified with those calculated from IGC method. Further, estimated Bond number was correlated with the bulk flow properties. The overall effect of dry coating (changing both the surface energy and nano-scale asperities) can be well demonstrated using the estimated Bond numbers. By addressing these four issues, the main hypothesis of the thesis, dry coating applied to the micronization process is beneficial to the pharmaceutical application, is proven.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003