The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title:	Heterogeneous flow structure and gas-solid transport of riser
Author:	You, Jun
View Online:	njit-etd2009-064 (xix, 150 pages ~ 7.3 MB pdf)
Department:	Department of Mechanical Engineering
Degree:	Doctor of Philosophy
Program:	Mechanical Engineering
Document Type:	Dissertation
Advisory Committee:	Zhu, Chao (Committee chair) Geskin, E. S. (Committee member) Ho, Teh C. (Committee member) Rosato, Anthony D. (Committee member) Singh, Pushpendra (Committee member)
Date:	2009-05
Keywords:	Heterogeneous structure Acceleration Gas-solid riser flow Fluid catalytic cracking Dense phase Cracking kinetics
Availability:	Unrestricted
Abstract:	This study aims to understand physical mechanisms of gas-solid transport and riser flow, investigate heterogeneous flow structures of gas-solid transport and their formation mechanism of the in riser flows, both in axial and radial directions. It provides sound interpretation for the experimental observation and valuable suggestion to riser reactor design. Chemical reaction is also coupled with flow hydrodynamics to board the industrial applications. This study mainly focuses on mathematical modeling approach based upon physical mechanism, and endeavor to validate model prediction against available experimental data. First of all, most important physical mechanisms including inter-particle collision force, gas/solid interfacial force and wall boundary effects, which are believed to be most important aspects of the flow hydrodynamics, have been investigated in this part. An energy-based mechanistic model was developed to analyze the partitions of the axial gradient of pressure by solids acceleration, collision-induced energy dissipation and solids holdup in gas-solid riser flows. Thought this part of study, important understanding of the inter-particle collision force (Fc), gas/solid interfacial force (FD) inside the momentum equations and energy dissipation (F), especially in dense and acceleration region, has been reached, Based on these understandings, a mechanistic riser hydrodynamic model was developed on the basis of gas-solid continuity and momentum equations, along with the better formulated drag force correlation and new formulation for moment dissipation of solids due to solids collisions. The proposed model is capable of yielding the coupled hydrodynamic parameters of solid volume fraction, gas and solid velocity, and pressure distribution along the whole riser. At the same time, special considerations are given to solids back-mixing and resultant cross- section area variation for the upward flow, which is especially prominent for low solids mass flow condition. With the further understanding of solid collision, gas/solid interfacial and wall boundary effects, in order to soundly interpret the well-known "core-annulus" 2-zone flow structure, newly discovered "core-annulus-wall" 3-zone structure" and provide reasonable explanation for the "choking" phenomena, a comprehensive modeling of continuous gas-solids flow structure both in radial and axial directions has been presented. This model, assuming one-dimensional two-phase flow in each zone along the riser, consists of a set of coupled ordinary-differential equations developed from the conservation laws of mass, momentum, and energy of both gas and solids phases. This part of study not only provides reasonable explanation for the 2-zone and 3-zone structure", but also finds out the potential reasons for the "choking" phenomenon. In order to investigate the different riser inlet configuration's effects on gas-solid mixing in dense region and improve the uniform inlet condition assumption in above models, a systemically study regarding with different inlet conditions have been done based on commercial package, Those simulation results are directly combined with model approach which reached the conclusion that riser flow structure an flow stability are weakly dependent on the type of solids feeding configuration. This part of study is specifically focused on chemical reaction coupled gas-solid transport flow hydrodynamics. The aim of this work is to develop a generic modeling approach which can fully incorporate multiphase flow hydrodynamics with chemical reaction process. This modeling approach opens up a new dimension for making generic models suitable for the analysis and control studies of chemical reaction units. The chemical reaction model was represented by a relatively simple four-lump based FCC reaction kinetic model, which will not bring us too complicated mathematical derivation without losing its popular acceptance. As a first endeavor to consider the significant mutual coupling between the flow hydrodynamics and cracking reaction, a localized catalyst to oil ratio is introduced. The new developed chemical reaction coupled hydrodynamic model was capable of quickly evaluating the flow parameters including gas and solid phase velocity and concentration, temperature and reaction yield profiles as the function of riser height.