Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/dissertations/547 in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: A microfabricated microconcentrator for sensors and chromatography
Author: Kim, Minhee
View Online: njit-etd2002-080
(xiii, 102 pages ~ 4.9 MB pdf)
Department: Department of Chemical Engineering, Chemistry and Environmental Science
Degree: Doctor of Philosophy
Program: Chemistry
Document Type: Dissertation
Advisory Committee: Mitra, S. (Committee chair)
Farmer, Kenneth Rudolph (Committee member)
Ivanov, Dentcho V. (Committee member)
Kebbekus, Barbara B. (Committee member)
Misra, Durgamadhab (Committee member)
Snow, Nicholas Harrer (Committee member)
Date: 2002-08
Keywords: Preconcentration
Microconnector
MEMS
Microfabrication
Availability: Unrestricted
Abstract:

The detection and quantitative measurement of trace components is a challenging task. The key component in such an instrument is the concentration step where the analytes are accumulated before the analysis. In this research, simple and inexpensive processes for the microfabrication of microconcentrator that can be used with sensors and as an injector in GC were developed. Analytes are selectively concentrated in the microconcentrator. Rapid electrical heating of the microconcentrator releases the adsorbed species as a 66 concentration pulse", which serves as an injection for the detection system. The relatively small size of the microconcentrator allows it to be heated and cooled rapidly. The microconcentrator serves the dual purposes of sample concentration and injection.

The devices were fabricated on 6-inch silicon substrate using standard photolithographic processes. First, a microheater embedded in silicon wafer was fabricated. The channels were lined with a conductive layer by sputtering metal film through which an electric current could be passed causing Ohmic heating. The preconcentration was done on thin-film polymeric layer deposited in the channel. Rapid heating of the conductive layer caused the "desorption pulse" to be injected into the sensor/detector. Several channel configurations were fabricated with a width between 50 to 456 μ-m depth between 35 and 350 μ-m and length between 6 and 19 cm. The separation distance between the channels was varied such that the entire microheater fitted in a 1cm 2 area. Due to their small size, the microconcentrators could be fabricated more than 50 at a time on a 6-inch silicon wafer.

In the first part of this research, the heating characteristics of the microheaters are studied. Deposition of metals to form a resistive heating element in microchannels was demonstrated. It was found that temperature as high as 360°C could be attained in a ten seconds. The microconcentrator was effective as a concentrator plus injector. It exhibited high signal enhancement and precision.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003