The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title:	Study of reactive media for chromium removal from groundwater by permeable barriers
Author:	Desai, Hemant S.
View Online:	njit-etd1999-008 (xi, 49 pages ~ 2.5 MB pdf)
Department:	Department of Chemical Engineering, Chemistry and Environmental Science
Degree:	Master of Science
Program:	Chemical Engineering
Document Type:	Thesis
Advisory Committee:	Labib, Mohamed E. (Committee chair) Knox, Dana E. (Committee member) Meegoda, Jay N. (Committee member)
Date:	1999-05
Keywords:	Groundwater--Pollution Heavy Metals--Environmental Aspects Chromium Membranes (Technology)
Availability:	Unrestricted
Abstract:	The purpose of the study was to select reduction media for application in permeable barriers for removing chromate ions from groundwater emanating from chromium refining sites in New Jersey. The high pH condition of groundwater in such sites is expected to pose limitations on the use of metallic iron (Fe0) as the sole reductive medium. Reasonable reduction kinetics was achieved using iron at pH < 9.2. Several pH lowering media were investigated and were found to have either very slow or very fast dissolution kinetics, which rendered them impractical for use in passive permeable barriers. Two other media, namely: pyrite and siderite minerals have shown promising results, but fell short of achieving the required performance. Detailed investigation of interfacial processes in a batch reactor have shown that the addition of a small amount of a neutral salt can significantly improve chromate reduction kinetics, even at high pH conditions around 10.9. The formation of passivating layers, which can slowdown the reaction significantly, was found to be important at high pH conditions. It is recommended that an injection system be used with the reactive barrier to insure that the pH and salt conditions are adequate to achieving the needed reaction rates while preventing the formation of passivating layers during this long-term application.