Niver, Edip (Committee chair)
Whitman, Gerald Martin (Committee member)
Rosenstark, Sol (Committee member)
Date:
1996-01
Keywords:
Antennas (Electronics)
Strip transmission lines.
Availability:
Unrestricted
Abstract:
Design procedure for Linearly Tapered Slot Antennas (LTSA) has been developed and implemented using High Frequency Structure Simulator (HFSS) code based on a finite-element analysis.
A CAD study of two variations of a LISA based on either a stripline or a microstrip feed has been carried out. Circular and radial stubs have been considered in these designs for an antenna operating at 10 Ghz. LTSA on a Duroid substrate fed by a stripline has been designed to operate with better than 12 dB return loss. Fabricated antenna was characterized and had even a wider response than the CAD design. Radiation patterns also were measured for this antenna. Furthermore, microstripline-fed LTSA designs were made. Further work on a low temperature co-fired ceramic substrate LTSA antennas and their arrays has been suggested.
If you have any questions please contact the ETD Team, libetd@njit.edu.