The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title:	Surface phenomena on the Tin-dioxide polycrystalline layers
Author:	Fluerasu, Andrei A.
View Online:	njit-etd1996-052 (xiii, 54 pages ~ 1.8 MB pdf)
Department:	Department of Physics
Degree:	Master of Science
Program:	Applied Physics
Document Type:	Thesis
Advisory Committee:	Chin, Ken K. (Committee chair) Farmer, Kenneth Rudolph (Committee member) Carr, William N. (Committee member)
Date:	1996-10
Keywords:	Polycrystalline Tin-dioxide--Surface chemistry. Gas-detectors.
Availability:	Unrestricted
Abstract:	Polycrystalline tin-dioxide is widely used in the detection of reducing gases (such as H2, CO, CH4, C2H5OH,...) in air by measuring its conductivity changes. The advantage of gas sensors based on such sensing devices is low cost and high sensitivity. In contrast to their widespread applications and to their successful empirical research and development work, the present understanding of the chemical sensing mechanisms is still immature. In this thesis, for gas sensors based on thick and porous tin-dioxide layers, a study of the response function upon variation of the partial pressure of ethanol vapors in 100% humidified air has been carried out. The influence of the working temperature and of the water vapors on the conductivity of the sensor was particularly emphasized. Based on our experimental data, a theoretical model of the sensing mechanism in thick and porous tin-dioxide layers is presented. The model accepts the conduction mechanism as being governed by the Schottky potential barriers at the junction between grains. For describing the adsorption of gas molecules on the solid surface a method of "conditioned adsorption" was developed. The central idea was to assume that the reducing gas molecules are "adsorbed" (i.e. react) only on pre-adsorbed oxygen. The predictions made in the frame of our theoretical model are in good agreement with the experimental data.