Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/theses/1716/ in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: Agitation requirements for complete liquid dispersion in liquid-liquid-gas systems
Author: Abu-Hakmeh, Emad Ahmad
View Online: njit-etd1993-054
(xv, 114 pages ~ 3.6 MB pdf)
Department: Department of Chemical Engineering, Chemistry and Environmental Science
Degree: Master of Science
Program: Chemical Engineering
Document Type: Thesis
Advisory Committee: Armenante, Piero M. (Committee chair)
Baltzis, Basil (Committee member)
Petrides, Demetri P. (Committee member)
Date: 1993-10
Keywords: Dispersion
Mixing
Fluid dynamics
Availability: Unrestricted
Abstract:

A number of studies have been published in the literature on the determination of the agitation intensity at which two immiscible liquids become completely dispersed in mechanically agitated vessels. However, no information is currently available on the agitation intensity required for the complete dispersion of two liquids in the presence of an additional gas phase. Therefore, the main objective of this study was to experimentally determine the minimum agitation speed for complete liquid-liquid dispersion, Ncd, in liquid-liquid-gas systems as a function of gas flow rate, impeller type, impeller size, and impeller off-bottom clearance. The minimum agitation speed was first determined visually. In order to eliminate the ambiguity of the visual determination method, a novel observer-free method was developed. This method is based on the analysis of the content of dispersed phase in samples taken from the mixture at different agitation speeds. The results indicate that the values of Ncd obtained with the proposed method are in close agreement (within 4%) with those obtained visually. The minimum agitation speed, Ncd, was found to be strongly affected by the air sparging rate. Higher agitation speeds were required to attain the complete dispersion state at higher air sparging rates. Ncd, was also found to be strongly affected by impeller type, impeller size, and impeller clearance for both gassed and ungassed systems.

A mathematical model based on Kolmogoroffs theory of isotropic turbulence was developed to predict the results obtained experimentally under gassed conditions. Provided that the impeller was not flooded, good agreement was found between the experimental values of Ncd, and the corresponding values predicted by the model.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003