Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/theses/1322 in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: Biodegradation of styrene in a recirculation reactor using immobilized activated sludge
Author: Shah, Shreyans Dilip
View Online: njit-etd1991-046
(xi, 55 pages ~ 3.0 MB pdf)
Department: Department of Chemical Engineering, Chemistry and Environmental Science
Degree: Master of Science
Program: Environmental Science
Document Type: Thesis
Advisory Committee: Sofer, Samir S. (Committee chair)
Trattner, Richard B. (Committee member)
Gotleib, Issac (Committee member)
Date: 1991
Keywords: Styrene--Biodegradation.
Immobilized microorganisms.
Sewage sludge--Biodegration.
Availability: Unrestricted
Abstract:

The performance of immobilized cells in the biological treatment of hazardous waste was investigated using a recirculating flow reactor in batch mode. A mixed culture activated sludge from a municipal waste water treatment plant was immobilized in calcium alginate gel, The bio-oxidation ability of these microbes towards a model toxin (styrene) was studied under closed system using dilute H2O2 solution as an oxygen source.
The process parameters studied were as follows:

  1. Effect of flow rate of recycle stream,
  2. Effect of biomass loading,
  3. Effect of spiking concentration of styrene, and
  4. Flow pattern and average residence time within the reactor.

Dissolved oxygen concentration was monitored by a Clark type dissolved oxygen probe and also by an oxygen electrode. Biodegradation rates of styrene with two different oxygen sources, air and H2O2, were determined and compared. Abiotic losses of styrene were taken into account. It was found that biodegradation was the primary removal mechanism when H2O2 was used as oxygen source, whereas stripping was the primary removal mechanism in the case of sir, considerable adsorption of styrene on the alginate was observed initially, but all the styrene desorbed to the bulk slowly and biodegraded finally.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003