Articles via Databases
Articles via Journals
Online Catalog
E-books
Research & Information Literacy
Interlibrary loan
Theses & Dissertations
Collections
Policies
Services
About / Contact Us
Administration
Littman Architecture Library
This site will be removed in January 2019, please change your bookmarks.
This page will redirect to https://digitalcommons.njit.edu/theses/1505 in 5 seconds

The New Jersey Institute of Technology's
Electronic Theses & Dissertations Project

Title: The effect of ultrasonic vibration on mass transfer in a packed column
Author: Stanecki, Joseph Walter
View Online: njit-etd1972-005
(viii, 84 pages ~ 3.0 MB pdf)
Department: Department of Chemical Engineering and Chemistry
Degree: Master of Science
Program: Chemical Engineering
Document Type: Thesis
Advisory Committee: Perna, Angelo J. (Committee chair)
Kimmel, Howard S. (Committee member)
Trattner, Richard B. (Committee member)
Date: 1972
Keywords: Separation (Technology).
Ultrasonic waves --Industrial applications.
Availability: Unrestricted
Abstract:

The object of this research was to investigate the possibility of using externally supplied ultrasonic vibration to surface of a packed distillation column operating at total reflux to improve the separation. The apparatus used for this experimentation consisted of a 2 inch ID Pyrex column having three pairs of ultrasonic transducers epoxied equidistance along the external surface of the column. Each pair of transducers was driven separately by a 50 watt amplifier! power supply and a sine/square wave generator.

There were three types of binary mixtures covered during experimentation: minimum boiling azeotropes, maximum boiling azeotropes and full range mixtures. In all cases the use of ultrasonic vibrations increased the composition of the overhead when compared with the normal operation. The principles which govern this improvement in separation are not well defined but can be partially explained by a combination of the following:

  1. The velocity of the vapor and its direction are affected by the generation of high frequency sound waves and shock waves caused by caviation of the liquid.
  2. The liquid loading as well as the path of the descending liquid are modified by the cavfation of the liquid.
  3. The arrangement of the packing is altered during ultrasonic operation which is evidenced by the presence of broken berl saddles in the areas of the transducers.

The above mentioned conditions are probably only a few of the many phenomena which occur in this quasi-steady state process. Only further experimentation can answer the questions which this experimentation has uncovered.


If you have any questions please contact the ETD Team, libetd@njit.edu.

 
ETD Information
Digital Commons @ NJIT
Theses and DIssertations
ETD Policies & Procedures
ETD FAQ's
ETD home

Request a Scan
NDLTD

NJIT's ETD project was given an ACRL/NJ Technology Innovation Honorable Mention Award in spring 2003